Answer:
You will need 450 cells (3 cm each) to meet the voltage/current requirement.
The panel must be 3 cells in one side, by 150 cell in another side. 1350 cm^2 or 0.135 m^2. They must be connected 3 in row in parallel (to add current), then each of the former group must be connected in series to meet the voltage, so it would be 150 rows of connected in series.
The panel can be optimized using a voltage inverter, to convert current to voltage. In this way, less cells can be used achieving the same output specs.
Explanation:
To meet the voltage:
120 [v] required voltage
0.8 [v] voltage of each cell
So we need 150 cells in series for the voltage.
To meet the current
1.0 [A] Required current
350[mA]=0.35[A] cell current
1/0.35=3 cell So we need 3 cells in parallel to add the currents and meet the requirement.
See the attached figure
Answer: 4.8 s
Explanation:
We have the following data:
the mass of the raft
the force applied by Sawyer
the raft's final speed
the raft's initial speed (assuming it starts from rest)
We have to find the time
Well, according to Newton's second law of motion we have:
(1)
Where is the acceleration, which can be expressed as:
(2)
Substituting (2) in (1):
(3)
Where
Isolating from (3):
(4)
Finally:
Answer:
The momentum would be doubled
Explanation:
The magnitude of the momentum of the freight train is given by:
where
m is the mass of the train
v is its speed
In this problem, we have that the speed of the train is unchanged, while the mass of the train is doubled:
therefore, the new momentum is
so, the momentum has also doubled.
Answer: b) pointed toward and parallel to the member.
Explanation:
It is shown in the picture attached
Answer:
24k
Explanation:
We multiply by 200V by 24