Answer:
Best explains Jamming
Explanation:
<em>The deliberate radiation of electromagnetic (EM) energy to degrade or neutralize the radio frequency long-haul supervisory control and data acquisition (SCADA) communications links, best explains what?</em>
Jamming is defined as the blocking or interference with authorized wireless communications. it's a problem in personal area network wireless technologies. Jamming can occur inadvertently due to high levels of noise .
Jammers can send radio signals to interfere or disrupt communication flows by by decreasing the signal-to-noise ratio.They use radio frequency to interfere with communications by keeping it busy.
Answer:
ωf = 0.16 rad/s
Explanation:
Moment of inertia of the child = mr² = 20(1.6²) = 51.2 kg•m²
Moment of Inertia of the MGR = ½mr² = ½(180)1.6² = 230.4 kg•m²
(ASSUMING it is a uniform disk)
Initial angular momentum of the child = Iω = I(v/r) = 51.2(1.4/1.6) = 44.8 kg•m²/s
Conservation of angular momentum
44.8 = (51.2 + 230.4)ωf
ωf = 0.15909090...
Answer:
B. The "Learner" was working with Milgram.
Explanation:
just took the test
give brainliest, please. :)
<h3>Answer;</h3>
<u>It would make the lens stronger. </u>
<h3>Explanation;</h3>
- The focal length is the distance between the optical center or the center of the lens to the focal point of a convex or concave lens.
- The power of the convex lens is lens ability to undertake refraction or bend light. It is given as the reciprocal of focal length.
- Power of the lens = 1/ f; therefore the smaller the focal length the higher the power and the larger the focal length the lower the power.
- Thus; decreasing the focal length of a convex lens makes the lens stronger.
Answer:
Graph for object that is not moving: B
Graph for object that is speeding up: D
Explanation:
A.) In order to represent that an object is not moving, you must either show that there is no velocity (0 m/s) or show a position over time graph that is a horizontal line.
Because the position is the same as time increases, the graph shows that there the object must be at rest, as there is no change in position due to velocity. (Velocity must be 0m/s)
B.) In order to represent an object is speeding up, the position time graph must either be a positive exponential function, the velocity time graph must be a positive, linear line, or the acceleration over time graph must be a positive, horizontal line.
Why is D the correct answer? Because if an object is speeding up, you know that the value of its speed (velocity) is increasing at some rate. And since speeding up refers to positive change, the function of velocity over time graph must be a positive function.
