a) since force = mass * acceleration
f= 900 * 0 (because constant speed = 0 acceleration)
similarly b) f = 0
Yes It is all metal is a good heat conductor
Answer:
1.24 C
Explanation:
We know that the magnitude of the induced emf, ε = -ΔΦ/Δt where Φ = magnetic flux and t = time. Now ΔΦ = Δ(AB) = AΔB where A = area of coil and change in magnetic flux = Now ΔB = 0 - 0.750 T = -0.750 T, since the magnetic field changes from 0.750 T to 0 T.
The are , A of the circular loop is πD²/4 where D = diameter of circular loop = 16.7 cm = 16.7 × 10⁻²m
So, ε = -ΔΦ/Δt = -AΔB/Δt= -πD²/4 × -0.750 T/Δt = 0.750πD²/4Δt.
Also, the induced emf ε = iR where i = current in the coil and R = resistance of wire = ρl/A where ρ = resistivity of copper wire =1.68 × 10⁻⁸ Ωm, l = length of wire = πD and A = cross-sectional area of wire = πd²/4 where d = diameter of wire = 2.25 mm = 2.25 × 10⁻³ m.
So, ε = iR = iρl/A = iρπD/πd²/4 = 4iρD/d²
So, 4iρD/d² = 0.750πD²/4Δt.
iΔt = 0.750πD²/4 ÷ 4iρD/d²
iΔt = 0.750πD²d²/16ρ.
So the charge Q = iΔt
= 0.750π(Dd)²/16ρ
= 0.750π(16.7 × 10⁻²m 2.25 × 10⁻³ m)²/16(1.68 × 10⁻⁸ Ωm)
= 123.76 × 10⁻² C
= 1.2376 C
≅ 1.24 C
Answer:
Displacement: 6.71 m, Direction: 63.4 degrees north of east
Explanation:
In the attached image we can aprecciate each one of the movements of the parade. Let's say that the parade started from the origin (point (0,0)) then it moves to the east 4 blocks it means now the parade is located at point (4,0).
Then the parade went to the south three blocks, so it moves to the coordinate (4,-3). After this the parade went to the west one block so the new coordinate point is (3, -3).
And finally the movement of the 0 parade was 9 blocks to the north. It means the final point is now (0,9) - (3,-3) = (3,6)
And the displacement will be defined by the folliwing vector operation:
We know that the magnitude of the displacement vector is defined by the phytagoras theorem
And the angle will be defined by:
tan(beta)=3/6
beta = tan^-1(6/3)
beta = 63.43°
Answer:
Explanation:
Acceleration is the rate of change of velocity. Usually, acceleration means the speed is changing, but not always. When an object moves in a circular path at a constant speed, it is still accelerating, because the direction of its velocity is changing.