Answer:
L= 2 mH
Explanation:
Given that
Frequency , f= 10 kHz
Maximum current ,I = 0.1 A
Maximum energy stored ,E= 1 x 10⁻⁵ J
The maximum energy stored in the inductor is given as follows
Where ,L= Inductance
I=Current
E=Energy
Now by putting the values in the above equation
L=0.002 H
L= 2 mH
We know that frequency f is given as
C=Capacitance , f=frequency ,L=Inductance
Now by putting the values
Therefore the inductance and capacitance will be 2 mH and 1.26 x 10⁻⁷ F respectively.
Answer:
Each layer has its own properties, composition, and characteristics that affects many of the key processes of our planet. They are, in order from the exterior to the interior – the crust, the mantle, the outer core, and the inner core.
Explanation:
Answer
given,
mass of the rod = 1.50 Kg
length of rod = 0.85 m
rotational velocity = 5060 rev/min
now calculating the rotational inertia of the system.
where L is the length of road, we will take whole length of rod because mass is at the end of it.
I = 1.084 kg.m²
hence, the rotational inertia the system is equal to I = 1.084 kg.m²
Answer:
between 10 and 15 percent
Explanation:
How to put your load
- First load the heavy
The safe trailer starts loading correctly. Uneven weight can affect steering, brakes and swing control.
In general, 60% of the weight of the load should be in the front half of the trailer and 40% in the rear half (unless the manufacturer indicates something different). When you place the load, you want it to be balanced from side to side, keeping the center of gravity near the ground and on the axle of the trailer.
- Hold your load
After balancing the load, you must hold it in place. An untapped load can move when the vehicle is moving and cause trailer instability.
- Trailer weight
To avoid overloading the trailer, look for the recommended weight rating. It is located on the VIN plate in the trailer chassis, usually on the tongue. Confirm the Gross Vehicle Weight Classification (GVWR) before towing.
GVWR: is the total weight that the trailer can support, including its weight. You can also find this number as the Gross Trailer Weight (GTW). The weight of the tongue should be 10-15% of the GTW.