All categories

1 year ago

Differentiate between velocity ratio and relative velocity in two points ??

1 answer:

4 0

The difference between velocity and relative velocity is that velocity is measured with respect to a reference point which is relative to a different point. While relative velocity is measured in a frame where an object is either at rest or moving with respect to the absolute frame.

You might be interested in

Jonathan must lift a 3000n rock using a lever. jonathan uses 300n of force to push down on the lever to move the rock. what is t

-Dominant- [34]

The load is the weight of the rock that Jonathan lifts:
$L=3000 N$
The effort instead is the force applied in input to the lever in order to lift the rock:
$E=300 N$

So, the ratio between load and effort for this exercise is
$\frac{L}{E}= \frac{3000 N}{300 N}=10$
So, the ratio is 10:1.

3 0

2 years ago

The term "exfoliation dome" is best applied to ________. the term "exfoliation dome" is best applied to ________. bryce national

BlackZzzverrR [31]

An exfoliation dome is a geological structure wherein it is primarily when the overburden of a surface gets removed by erosion, thus leading to rock relaxation. In addition, the term would be best applied to the national landmark of Yosemite National Park wherein the place has one of the best waterfalls in California.

4 0

3 years ago

Why might political parties prefer closed primaries to open primaries

sweet [91]

In a closed primary, only voters registered with a given party can vote in that party's primary.

5 0

2 years ago

For a certain RLC circuit the maximum generator EMF is 125 V and the maximum current is 3.20 A. If le a) the impedance of the ci

MAXImum [283]

Answer:

Part (i)

Z = 39.06 ohm

Part (ii)

R = 21.7 ohm

Explanation:

a) here we know that

maximum value of EMF = 125 V

maximum value of current = 3.20 A

now by ohm's law we can find the impedence as

$z = \frac{V_o}{i_o}$

now we will have

$z = \frac{125}{3.20} = 39.06 ohm$

Part b)

Now we also know that

$\frac{R}{z} = cos\theta$

$\theta = 0.982 rad = 56.3 degree$

now we have

$\frac{R}{39.06} = cos56.3$

$R = 21.7 ohm$

5 0

2 years ago

When cars are equipped with flexible bumpers, they will bounce off each other during low-speed collisions, thus causing less dam

Len [333]

Answer:

Explanation:

Given that,

Mass of the heavier car m_1 = 1750 kg

Mass of the lighter car m_2 = 1350 kg

The speed of the lighter car just after collision can be represented as follows

$m_1u_1+m_2u_2=m_1v_1+m_2v_2\\\\v_2=\frac{m_1u_1+m_2u_2-m_1v_1}{m_2}$

$v_2=\frac{(1850)(1.4)+(1450)(-1.10)-(1850)(0.250)}{1450} \\\\=\frac{2590+(-1595)-(462.5)}{1450} \\\\=\frac{2590-1595-462.5}{1450} \\\\=\frac{532.5}{1450}\\\\=0.367m/s$

b) the change in the combined kinetic energy of the two-car system during this collision

$\Delta K.E=(\frac{1}{2} m_1v_1^2+\frac{1}{2} m_2v_2^2)-(\frac{1}{2} m_1u_1^2+\frac{1}{2} m_2u_2^2)\\\\=\frac{1}{2} (m_1(v_1^2-u_1^2)+m_2(v_2^2-u_2^2))$

substitute the value in the equation above

$=\frac{1}{2} (1850((0.250)^2-(1.4)^2)+(1450((0.3670)^2-(-1.10)^2)\\\\=\frac{1}{2}(11850(0.0625-1.96)+(1450(0.1347)-(1.21))\\\\= \frac{1}{2}(11850(-1.8975))+(1450(-1.0753))\\\\=\frac{1}{2} (-3510.375+(-1559.185)\\\\=\frac{1}{2} (-5069.56)\\\\=-2534.78J$

Hence, the change in combine kinetic energy is -2534.78J

8 0

2 years ago