Answer: hello your question is incomplete below is the missing part
A spherical cavity is hollowed out of the interior of a neutral conducting sphere. At the center of the cavity is a point charge, of positive charge q.
answer:
- q
Explanation:
Since the spherical cavity was carved out of a neutral conducting sphere hence the electric field inside this conductor = zero
given that there is a point charge +q at the center of the spherical cavity hence for the electric field inside the conductor to be = zero the total surface charge qint on the wall of the cavity will be -q
Answer:
a.) The main scale reading is 10.2cm
b.) Division 7 = 0.07
c.) 10.27 cm
d.) 10.31 cm
e.) 10.24 cm
Explanation:
The figure depicts a vernier caliper readings
a.) The main scale reading is 10.2 cm
The reading before the vernier scale
b.) Division 7 = 0.07
the point where the main scale and vernier scale meet
c.) The observed readings is
10.2 + 0.07 = 10.27 cm
d.) If the instrument has a positive zero error of 4 division
correct reading = 10.27 + 0.04 = 10.31cm
e.) If the instrument has a negative zero error of 3 division
correct reading = 10.27 - 0.03 = 10.24cm
Answer:
Work = F * s where s is the distance F moves
Since F is stationary, in this case, "no work" is done by either person
Answer:
0.28802
2.57162 W
14.28 W
53.55 W
6.07142 W
Explanation:
R = 280Ω
L = 100 mH
C = 0.800 μF
V = 50 V
ω = 10500rad/s
For RLC circuit impedance is given by
Power factor is given by
The power factor is 0.28802
The average power to the circuit is given by
The average power to the circuit is 2.57162 W
Power to resistor
Power to resistor is 14.28 W
Power to inductor
Power to the inductor is 53.55 W
Power to the capacitor
The power to the capacitor is 6.07142 W
Answer: In your right wrist
Explanation: