Answer:
The magnitude of F1 is
The magnitude of F2 is
And the direction of F2 is
Explanation:
<u>Net Force
</u>
Forces are represented as vectors since they have magnitude and direction. The diagram of forces is shown in the figure below.
The larger pull F1 is directed 21° west of north and is represented with the blue arrow. The other pull F2 is directed to an unspecified direction (red arrow). Since the resultant Ft (black arrow) is pointed North, the second force must be in the first quadrant. We must find out the magnitude and angle of this force.
Following the diagram, the sum of the vector components in the x-axis of F1 and F2 must be zero:
The sum of the vertical components of F1 and F2 must equal the total force Ft
Solving for in the first equation
The magnitude of F1 is
The magnitude of F2 is
And the direction of F2 is
Yes yes multiply hurry up
Answer:
1.05 J.
Explanation:
Kinetic Energy: This is the energy possessed by a body due to its motion. The S.I unit of kinetic energy is Joules (J). The formula of kinetic energy is given as
Ek = 1/2mv²................. Equation 1
Where Ek = kinetic energy, m = mass of the uniform rod, v = liner velocity of the rod.
But,
v = αr .......................... Equation 2
Where α = angular velocity of the rod, r = radius of the circle.
Given: α = 3.6 red/s, r = 120/2 = 60 cm = 0.6 m.
Substitute into equation 2
v = 3.6(0.6)
v = 2.16 m/s.
Also given: m = 450 g = 0.45 kg.
Substitute into equation 1
Ek = 1/2(0.45)(2.16²)
Ek = 1.05 J.
Answer:
567.321nm
Explanation:
See attached handwritten document for more details
Answer:
C) only part of the bandwidth of the AM signal is amplified, causing some of the sideband information to be lost and distortion results.
Explanation:
Selectivity is the ability of a receiver to respond only to a specific signal on a wanted frequency and reject other signals nearby in frequency.
If a receiver is overly selective, only part of the bandwidth of the AM signal is amplified, causing some of the sideband information to be lost and distortion results. Whereas, if a receiver is underselective, the receiver can pick different signals on different frequencies at the same time.