Yeah, it increases the surface tension !!!
Sand and water can be separated by any of the following methods:
1. Sedimentation and decantation: This method involves the mixture being kept undisturbed for some time. After some time, sand being heavier and insoluble in water, settles down at the bottom of container. Now, water is poured into another container to separate it from sand.
2. Filtration: This method involves the mixture being passed through a filter paper (a filter with very fine pores). Sand particles being larger in size are retained by the filter paper and get separated from water.
I hope this helps! :D
Fossil fuels are mostly the major source of energy
Answer:
A. Strong initial heating caused some of the hydrate sample to spatter out of the crucible.
Explanation:
Hi
The percentage of water in the sample is lower than expected.
A. Strong initial heating caused some of the hydrate sample to spatter out of the crucible:
If part of the sample is splashed from the crucible the mass of water detected will be less.
B. The dehydrated sample absorbed moisture after heating:
If the sample absorbs water after heating the percentage of water would be higher than expected.
C. The amount of the hydrate sample used was too small:
Depending on the sample size, different procedures can be chosen for analysis.
D. The crucible was not heated to constant mass before use:
In many occasions the crucible is heated next to the sample and not in previous form.
E. Excess heating caused the dehydration sample to decompose:
If the sample decomposes during heating, the analysis should be discarded.
success with your homework
Answer:
Factors that cause population growth include increased food production, improved health care services, immigration and high birth rate. These factors have led to overpopulation, which has more negative effects than positive impacts. The world population today is over 7 billion and the number is increasing with each passing year.
Hope this helps!