Using the principle of floatation.
u = w............(a)
Upthrust of fluid is equal to the weight of the object.
Let the volume of the wood be V.
The upthrust u, is related to the volume submerged in water, and that is 1/5 of it volume, that is (1/5)V = 0.2V
Formula for upthrust, u = vdg
where v = volume of fluid displaced
d = density of fluid
g = acceleration due to gravity
weight, w = mg
where m = mass
g = acceleration due to gravity
From (a)
u = w
vdg = mg Cancel out g
vd = m
The v is equal to 0.2V, which is the submerged volume. Notice that the small letter v is volume of fluid displaced, and capital V is the volume of the solid.
d is density of fluid which is water in this case, 1000 kg/m³
0.2V * 1000 = m
200V = m
Hence the mass of the object is 200V kg.
But Density of solid = Mass of solid / Volume of solid
= 200V / V
= 200 kg/m³
Density of solid = 200 kg/m³
That's a not-bad description of a capacitor.
A) 140 degrees
First of all, we need to find the angular velocity of the Ferris wheel. We know that its period is
T = 32 s
So the angular velocity is
Assuming the wheel is moving at constant angular velocity, we can now calculate the angular displacement with respect to the initial position:
and substituting t = 75 seconds, we find
In degrees, it is
So, the new position is 140 degrees from the initial position at the top.
B) 2.7 m/s
The tangential speed, v, of a point at the egde of the wheel is given by
where we have
r = d/2 = (27 m)/2=13.5 m is the radius of the wheel
Substituting into the equation, we find
Kinetic Energy means <span>energy that a body possesses by virtue of being in motion. I hope im not too late</span>
Answer:
T= 38.38 N
Explanation:
Here
mass of can = m = 3 kg
g= 9.8 m/sec2
angle θ = 40°
From figure we see the vertical and horizontal component of tension force T
If the can is to slip - then horizontal component of tension force should become equal to force of friction.
First we find force of friction
Fs= μ R
where
μ = 0.76
R = weight of can = mg = 3 × 9.8 = 29.4 N
Now horizontal component of tension
Tx= T cos 40 = T× 0.7660 N
==>T× 0.7660 = 29.4
==> T= 38.38 N