Average acceleration = (change in speed) / (time for the change) .
Average acceleration = (13.2 - 6) / (6.32) = 7.2 / 6.32 = about <em>1.139... m/s²</em> .
Answer:
The strength of the gravitational force between two objects depends on two factors, mass and distance. the force of gravity the masses exert on each other. If one of the masses is doubled, the force of gravity between the objects is doubled. increases, the force of gravity decreases.
Explanation:
The conversion factor you use is 100 cm = 1 m.
You can divide 20 by 100 to get the answer.
20 cm/100 cm =.2 m
Hope this helped!
The mechanical advantage of a machine is the ratio of the force produced by the machine to the force applied to it. Therefore, we may calculate the applied force using:
Mechanical advantage = force by machine / force applied
6 = 2 / force applied
Force applied = 1/3
Thus, the distance that the effort must move will be 1/3 inch
Answer:
the location of the center of gravity for the entire body is 1.08 m
Explanation:
Given the data in the question;
w1 = 458 N, y1 = 1.34 m
w2 = 120 N, y2 = 0.766 m
w3 = 89.8 N, y2 = 0.204 m
The location arrangement of the body part is vertical, locate the overall centre of gravity by simply replacing the horizontal position x by the vertical position y as measured relative to the floor.
so,
= (w1y1 + w2y2 + w3y3 ) / ( w1 + w2 + w3 )
so we substitute in our values
= (458×1.34 + 120×0.766 + 89.8×0.204 ) / ( 458 + 120 + 89.8 )
= 723.9592 / 667.8
= 1.08 m
Therefore, the location of the center of gravity for the entire body is 1.08 m
