Answer:
Yes
Explanation:
Friction is a force that opposes relative motion between systems in contact. One of the simpler characteristics of friction is that it is parallel to the contact surface between systems and always in a direction that opposes motion or attempted motion of the systems relative to each other.
The pressure increase at the bottom of the pool after they enter the pool and float is 106.103 Pa.
<h3>What is absolute pressure?</h3>
Absolute pressure is the force that exists in a space when there is no matter present, or when there is a perfect vacuum. This absolute zero serves as the baseline for measurements in absolute pressure. The measurement of barometric pressure is the greatest illustration of an absolute referenced pressure. In order to determine absolute pressure, a complete vacuum is used. In contrast, gauge pressure is the amount of pressure that is measured in relation to atmospheric pressure, also referred to as barometric pressure.
given,
diameter = 6 m
depth = h = 1.5 m
Atmospheric pressure = P₀ = 10⁵ Pa
a) absolute pressure
P = P₀ + ρ g h
P = 10⁵ + 1000 x 10 x 1.5
P = 1.15 x 10⁵ Pa
b) When two person enters into the pool,
mass of the two person = 150 Kg
weight of water level displaced exists equal to the weight of person.
Area of pool
Height of the water rise
P = ρ g h
P = 1000 x 10 x 0.0106
P = 106.103 Pa
To learn more about absolute pressure refer to:
brainly.com/question/17200230
#SPJ4
Answer:
Angular velocity (w) = 8.86 rad/s
Explanation:
Angular velocity (w) =
g= 9.81 m/s
R= 0.5
hi (initial depth) = 0.5m
Hence= = 8.86 rad/s
Answer:
It would be A.
Explanation:
The scale goes from 0 to 14, With 0 being acidic and 14 being basic.
So if 7 is neutral, then anything less than 7 is moving more towards being more acidic. Anything higher than 7 is moving towards being more basic.
Answer:
a) τ = 0.672 N m
, b) θ = 150 rad
, c) W = 100.8 J
Explanation:
a) for this part let's start by finding angular acceleration, when the angular velocity stops it is zero (w = 0)
w = w₀ + α t
α = -w₀ / t
α = 120 / 2.5
α = 48 rad / s²
The moment of inertia of a cylinder is
I = ½ M R²
Let's calculate the torque
τ = I α
τ = ½ M R² α
τ = ½ 2.8 0.1² 48
τ = 0.672 N m
b) we look for the angle by kinematics
θ = w₀ t + ½ α t2
θ = ½ α t²
θ = ½ 48 2.5²
θ = 150 rad
c) work in angular movement
W = τ θ
W = 0.672 150
W = 100.8 J