The magnitude of your displacement can be equal to the distance you covered, or it can be less than the distance you covered. But it can never be greater than the distance you covered.
This is because displacement is a straight line, whereas distance can be a straight line, a squiggly line, a zig-zag line, a line with loops in it, a line with a bunch of back-and-forths in it, or any other kind of line.
The straight line is always the shortest path between two points.
Answer:
44.64 seconds
Explanation:
t = Time taken
u = Initial velocity
v = Final velocity
s = Displacement
a = Acceleration due to gravity = 9.8 m/s²
<u>Time taken to reach 1180 m is 11.29 seconds</u>
<u>Time the rocket will keep going up after the engines shut off is 13.06 seconds.</u>
The distance the rocket will keep going up after the engines shut off is 836.05 m
Total distance traveled by the rocket in the upward direction is 1180+836.05 = 2016.05 m
The rocket will fall from this height
<u>Time taken by the rocket to fall from maximum height is 20.29 seconds</u>
Time the rocket will stay in the air is 11.29+13.06+20.29 = 44.64 seconds
The water pressure on the first floor must be 455 PSI in order to push the water to the 13th floor at the given pressure.
The given parameters;
- <em>Pressure on the 13 th floor, P₁ = 35 PSI</em>
- <em>Distance between each floor, d = 10 ft</em>
The vertical pressure of the water is calculated as follows;
The vertical height of the first floor from the 13th floor = 130 ft
The vertical height of the 13 ft floor = 10 ft
Thus, the water pressure on the first floor must be 455 PSI in order to push the water to the 13th floor at the given pressure.
Learn more about vertical height and pressure here: brainly.com/question/15691554
To solve this problem it is necessary to apply the kinematic equations of motion.
By definition we know that the position of a body is given by
Where
Initial position
Initial velocity
a = Acceleration
t= time
And the velocity can be expressed as,
Where,
For our case we have that there is neither initial position nor initial velocity, then
With our values we have , rearranging to find a,
Therefore the final velocity would be
Therefore the final velocity is 81.14m/s
Answer:
Shown by explanation;
Explanation:
The heat of the sample = mass ×specific heat capacity of the sample × temperature change(∆T)
Assumption;I assume the mass of the samples are : 109g and 192g
∆T= 30.1-21=8.9°c.
The heat of the samples are for 109g are:
0.109 × 4186 × 8.9 =4060.84J
For 0.192g are;
∆T= 67-30.1-=36.9°c
0.192 × 4186×36.9=29656.97J