The primary ingredient of power yoga was said to be heated. The heat makes the power yoga so particularly effective as a physical therapy. The heat is primarily used in shaping glasses to any figures that the person may want to. Power yoga can practically provide more space for fluids to carry the nutrients and remove toxins
Answer:
a) x = (0.0114 ± 0.0001) in
, b) the number of decks is 5
Explanation:
a) The thickness of the deck of cards (d) is measured and the thickness of a card (x) is calculated
x = d / 52
x = 0.590 / 52
x = 0.011346 in
Let's look for uncertainty
Δx = dx /dd Δd
Δx = 1/52 Δd
Δx = 1/52 0.005
Δx = 0.0001 in
The result of the calculation is
x = (0.0114 ± 0.0001) in
b) You want to reduce the error to Δx = 0.00002, the number of cards to be measured is
#_cards = n 52
The formula for thickness is
x = d / n 52
Uncertainty
Δx = 1 / n 52 Δd
n = 1/52 Δd / Δx
n = 1/52 0.005 / 0.00002
n = 4.8
Since the number of decks must be an integer the number of decks is 5
Answer:
The deceleration of the dragster upon releasing the parachute such that the wheels at B are on the verge of leaving the ground is 16.33 m/s²
Explanation:
The additional information to the question is embedded in the diagram attached below:
The height between the dragster and ground is considered to be 0.35 m since is not given ; thus in addition win 0.75 m between the dragster and the parachute; we have: (0.75 + 0.35) m = 1.1 m
Balancing the equilibrium about point A;
F(1.1) - mg (1.25) = 
- 1200(9.8)(1.25) = 1200a(0.35)
- 14700 = 420 a ------- equation (1)
--------- equation (2)
Replacing equation 2 into equation 1 ; we have :
1320 a - 14700 = 420 a
1320 a - 420 a =14700
900 a = 14700
a = 14700/900
a = 16.33 m/s²
The deceleration of the dragster upon releasing the parachute such that the wheels at B are on the verge of leaving the ground is 16.33 m/s²
Weather balloons are filled with only a small amount of helium because the __Volume__. of the balloon will increase as the air pressure decreases at higher altitudes.
Answer:
g/cm³
Explanation:
From the question given above,
The y-axis is representing mass (g)
The x-axis is representing volume (cm³)
Unit of slope =?
Slope of a graph is simply defined as the change in y-axis divided by the change in x-axis. Mathematically it is expressed as:
Slope = change in y-axis (Δy)/change in x-axis (Δx)
Slope = Δy/Δx
Thus, with the above formula, we can obtain the unit used for measuring the slope as follow:
y-axis = mass (g)
x-axis = volume (cm³)
Slope =.?
Slope = Δy/Δx
Slope = mass (g) /volume (cm³)
Slope = g/cm³
Therefore, the derive unit used for measuring the slope is g/cm³
