Pleaseeeee HELPPPP THIS IS TIMED ALSO,

Physics

1 answer:

TEA [102]1 year ago

8 0

Answer:

Friction, normal force, and weight

Explanation:

If the book slows down, it means that there must be friction acting in the opposite direction of the direction the book is moving in.

Weight is caused by the gravitational pull of the Earth on the book, and normal force is the table pushing the book up because the book is pushing down on the table (3rd law.)

Note that weight and normal force is not the 3rd law action-reaction pair. The pair is the force of the book on the table and the force of the table on the book.

You might be interested in

(a) A 1.00-μF capacitor is connected to a 15.0-V battery. How much energy is stored in the capacitor? ________ μJ (b) Had the ca

gulaghasi [49]

Answer:

(a) $E_{ c} = 112.5 \mu J$

(b) $E'_{ c} = 18 \mu J$

Solution:

According to the question:

Capacitance, C = $1.00\mu F = 1.00\times 10^{- 6} F$

Voltage of the battery, $V_{b} = 15.0 V$

(a)The Energy stored in the Capacitor is given by:

$E_{c} = \frac{1}{2}CV_{b}^{2}$

$E_{c} = \frac{1}{2}\times 1.00\times 10^{- 6}\times 15.0^{2}$

$E_{ c} = 112.5 \mu J$

(b) When the voltage of the battery is 6.00 V, the the energy stored in the capacitor is given by:

$E'_{c} = \frac{1}{2}CV'_{b}^{2}$

$E'_{c} = \frac{1}{2}\times 1.00\times 10^{- 6}\times 6.0^{2}$

$E'_{ c} = 18 \mu J$

6 0

2 years ago

A semicircular plate with radius 6 m is submerged vertically in water so that the top is 2 m above the surface. Express the hydr

dalvyx [7]

Answer: 313920

Explanation:First, we’re going to assume that the top of the circular plate surface is 2 meters under the water. Next, we will set up the axis system so that the origin of the axis system is at the center of the plate.

Finally, we will again split up the plate into n horizontal strips each of width Δy and we’ll choose a point y∗ from each strip. Attached to this is a sketch of the set up.

The water’s surface is shown at the top of the sketch. Below the water’s surface is the circular plate and a standard xy-axis system is superimposed on the circle with the center of the circle at the origin of the axis system. It is shown that the distance from the water’s surface and the top of the plate is 6 meters and the distance from the water’s surface to the x-axis (and hence the center of the plate) is 8 meters.

The depth below the water surface of each strip is,

di = 8 − yi

and that in turn gives us the pressure on the strip,

Pi =ρgdi = 9810 (8−yi)

The area of each strip is,

Ai = 2√4− (yi) 2Δy

The hydrostatic force on each strip is,

Fi = Pi Ai=9810 (8−yi) (2) √4−(yi)² Δy

The total force on the plate is found on the attached image.