Answer:
The fly travels 2.4 m
Explanation:
Since the Two steamrollers begin 100 m apart and head toward each other, each at a constant speed of 1.00 m/s, we can find the time until they crash by the formula:
Distance = Speed × Time
Time = Distance /Speed
Time = (100 m) / (1 m/s)
Time = 100 hours
Now, the fly will spend the same amount of time traveling as the steamrollers.
Since the fly moves at a speed of 2.4 m/s and we have a time of one hour the steamroller take to collide, then the fly will go a distance of;
Distance = speed x time = 2.4 × 1 = 2.4 m
Answer:
27 blocks
Explanation:
First, the expression to use here is the following:
P = F/A
Where:
P: pressure
F: Force exerted
A: Area of the block.
Now , we need to know the number of blocks needed to exert a pressure that equals at least 2 atm. To know this, we should rewrite the equation. We know that certain number of blocks, with the same weight and dimensions are putting one after one over the first block, so we can say that:
P = W/A
P = n * W1 / A
n would be the number of blocks, and W1 the weight of the block.We have all the data, and we need to calculate the area of the block which is:
A = 0.2 * 0.1 = 0.02 m²
Solving now for n:
n = P * A / W1
The pressure has to be expressed in N/m²
P = 2 atm * 1.01x10^5 N/m² atm = 2.02x10^5 N/m²
Finally, replacing all data we have:
n = 2.02x10^5 * 0.02 / 150
n = 26.93
We can round this result to 27. So the minimum number of blocks is 27.
The number of charge drifts are 3.35 X 10⁻⁷C
<u>Explanation:</u>
Given:
Potential difference, V = 3 nV = 3 X 10⁻⁹m
Length of wire, L = 2 cm = 0.02 m
Radius of the wire, r = 2 mm = 2 X 10⁻³m
Cross section, 3 ms
charge drifts, q = ?
We know,
the charge drifts through the copper wire is given by
q = iΔt
where Δt = 3 X 10⁻³s
and i =
where R is the resistance
R =
ρ is the resistivity of the copper wire = 1.69 X 10⁻⁸Ωm
So, i =
q =
Substituting the values,
q = 3.14 X (0.02)² X 3 X 10⁻⁹ X 3 X 10⁻³ / 1.69 X 10⁻⁸ X 0.02
q = 3.35 X 10⁻⁷C
Therefore, the number of charge drifts are 3.35 X 10⁻⁷C
Kinetic energy is proportional to the square of the speed. So when anything or anybody speeds up, its kinetic energy increases.