20 miles/2 hours = 10 miles/1 hour, therefore her average speed is 10mph
Answer:
The answer is below
Step-by-step explanation:
The linear model represents the height, f(x), of a water balloon thrown off the roof of a building over time, x, measured in seconds: A linear model with ordered pairs at 0, 60 and 2, 75 and 4, 75 and 6, 40 and 8, 20 and 10, 0 and 12, 0 and 14, 0. The x axis is labeled Time in seconds, and the y axis is labeled Height in feet. Part A: During what interval(s) of the domain is the water balloon's height increasing? (2 points) Part B: During what interval(s) of the domain is the water balloon's height staying the same? (2 points) Part C: During what interval(s) of the domain is the water balloon's height decreasing the fastest? Use complete sentences to support your answer. (3 points) Part D: Use the constraints of the real-world situation to predict the height of the water balloon at 16 seconds.
Answer:
Part A:
Between 0 and 2 seconds, the height of the balloon increases from 60 feet to 75 feet at a rate of 7.5 ft/s
Part B:
Between 2 and 4 seconds, the height stays constant at 75 feet.
Part C:
Between 4 and 6 seconds, the height of the balloon decreases from 75 feet to 40 feet at a rate of -17.5 ft/s
Between 6 and 8 seconds, the height of the balloon decreases from 40 feet to 20 feet at a rate of -10 ft/s
Between 8 and 10 seconds, the height of the balloon decreases from 20 feet to 0 feet at a rate of -10 ft/s
Hence it fastest decreasing rate is -17.5 ft/s which is between 4 to 6 seconds.
Part D:
From 10 seconds, the balloon is at the ground (0 feet), it continues to remain at 0 feet even at 16 seconds.
Answer:
Step-by-step explanation:
Well 8 hundredths is also know as 0.08 if we put in in the decimal form.
I hope this helps :D
Answer:
yes it is
Step-by-step explanation:
Answer:
Yes they will intersect
Function 1= F(X)=2X+5
Function 2=H(X)=3X+2
INTERSECT=(3,11)
Step-by-step explanation:
First of all, we create 2 LINEAR function, i created the function f(x)=2x+5 and the function h(x)=3x+2, both are linear(without a quadratic term). Then
you replace the x for a number:
Table 1 (F(X)=2X+5) Table 2 (H(X)=3X+2)
X=1----->Y=2+5=7 X=1------>Y=3·1+2=5
X=2---->Y=2·2+5=9 X=2----->Y=3·2+2=8
X=3---->Y=3·3+5=11 X=3----->Y=3·3+2=11
With both tables of data we can see that in the X=3/Y=11 point this two linear functions will intersect so the answer is that the two functions will intersect at (3,11)----->(X,Y)