56. What is the range of magnitudes that can be attained from the

Physics

1 answer:

Svetach [21]2 years ago

8 0

Answer:

Explanation:

Given the magnitude of the forces, 7N and 2N, the minimum combining force acting on the forces are when the force's is acting in opposite direction.

Magnitude of the force in opposite direction is 7N - 5N = 2N

The maximum combining force occurs when they act in the same direction. Magnitude of the force in the same direction is 5N+7N = 12N

Hence the range of magnitude requires is 2N≤F≤12N

You might be interested in

In which type of bone does ossification occur in the membranes?

Afina-wow [57]

In the formation of flat bones such as the skull the mandibles and the clavicles

3 0

2 years ago

The magnet has an unchanging magnetic field: very strong near the magnet, and weak far from the magnet. How did the magnetic fie

STatiana [176]

Answer:

The magnetic field through the coil at first increases steadily up to its maximum value, and then decreases gradually to its minimum value.

Explanation:

At first, the magnet fall towards the coils; inducing a gradually increasing magnetic field through the coil as it falls into the coil. At the instance when half the magnet coincides with the coil, the magnetic field magnitude on the coil is at its maximum value. When the magnet falls pass the coil towards the floor, the magnetic field then starts to decrease gradually from a strong magnitude to a weak magnitude.

This action creates a changing magnetic flux around the coil. The result is that an induced current is induced in the coil, and the induced current in the coil will flow in such a way as to oppose the action of the falling magnet. This is based on lenz law that states that the induced current acts in such a way as to oppose the motion or the action that produces it.

3 0

2 years ago

According to Ohm's law, a circuit with a high resistance _____. will have a low electric current will have a high electric curre

lyudmila [28]

Remark
When you are asked a question like this, the first thing to do is search out a formula and put some limits on it.

Formula
I = E/R which comes from E = IR. To get to the derived formula, divide both sides by R
E/R = I*R/R
E/R = I

Discussion
This is an inverse relationship. That means that as one goes up the other one will go down.

So in this case you keep E constant and you manipulate R and look at your results for I

Case 1
Let us say that E = 10 volts
Let us also say the R = 10 ohms

I = E/R
I = 10/10
I = 1 ohm

Case Two
Let's raise the Resistance to 100 ohms
E = 10
R = 100
I = 10/100 = 0.1

Conclusion
As the Resistance goes up, the current goes down. Answer: A

8 0

2 years ago

Read 2 more answers

A cylindrical wire has a length of 2.80 m and a radius of 1.03 mm. It carries a current of current of 1.35 A, when a a voltage o

aleksley [76]

Answer:

0.023 Ohms

Explanation:

Given data

Length= 2.8m

radius= 1.03mm

current I= 1.35 A