Answer:
a)-2m/s^2
b)27.2m/s
Explanation:
Hello! The first step to solve this problem is to find the mass of the block remembering that the definition of weight force is mass by gravity (g=9.8m / s ^ 2)
W=455N=weight
W=mg
W=455N=weight
The second step is to draw the free body diagram of the body (see attached image) and use Newton's second law that states that the sum of the forces is equal to mass by acceleration
for point b we use the equations of motion with constant acceleration to find the velocity
Where
Vf = final speed
Vo = Initial speed
=0
A = acceleration
=2m/s
X = displacement
=6.8m
Solving
Answer:
Periodic.
Explanation:
Electromagnetic waves is a propagating medium used in all communications device to transmit data (messages) from the device of the sender to the device of the receiver.
Generally, the most commonly used electromagnetic wave technology in telecommunications is radio waves.
Radio waves can be defined as an electromagnetic wave that has its frequency ranging from 30 GHz to 300 GHz and its wavelength between 1mm and 3000m. Therefore, radio waves are a series of repetitive valleys and peaks that are typically characterized of having the longest wavelength in the electromagnetic spectrum.
Basically, as a result of radio waves having long wavelengths, they are mainly used in long-distance communications such as the carriage and transmission of data.
Generally, a fixed speed is used for the propagation of traveling waves and this speed is usually denoted with the variable "v" or sometimes "c."
Furthermore, if the waveform of a traveling wave is repeated every time at specific intervals T, it is referred to as periodic wave.
Mathematically, the period of a traveling wave is given by the formula;
Where;
T is the time measured in seconds.
Answer:
b. increasing the number of turns per unit length on the solenoid
e. increasing the current in the solenoid
Explanation:
As we know that energy density depends on the strength of the magnetic field. The magnetic field strength depends on the no of turns of the solenoid and the current passing through it. The greater the number of turns per unit length, greater the current passing through it, more stronger the magnetic field is. As
B = μ₀nI
n = no of turns
I = current through the wire
So the right options are
b. increasing the number of turns per unit length on the solenoid
e. increasing the current in the solenoid
Solar heating is the system composed of a fluid system to move the heat from the collector to its point of usage and a reservoir to stock the heat
<u>Explanation:</u>
The options given here like coal burning uses solid material as the source to heat and to generate energy. Similarly, nuclear power also requires solid particles like atoms or neutrons to strike the moderators forming energy.
In both of these cases, fluid system is present but it is used completely as coolant and to maintain the temperature. Thus, the remaining system that is solar heating has been done for water tanks where the fluid as water is used to move the heat from its collector to its point of usage. Even in solar system it is used as reservoir to stock the heat.
I think as a mold. when the Flood came in Genesis, i believe that when the fish were washed away, the kinda made a mold in a rock.
