Answer:
The drag coefficient is
Explanation:
From the question we are told that
The density of air is
The diameter of bottom part is
The power trend-line equation is mathematically represented as
let assume that the velocity is 20 m/s
Then
The drag coefficient is mathematically represented as
Where
is the drag force
is the density of the fluid
is the flow velocity
A is the area which mathematically evaluated as
substituting values
Then
<u>Answer:</u> The velocity of released alpha particle is
<u>Explanation:</u>
According to law of conservation of momentum, momentum can neither be created nor be destroyed until and unless, an external force is applied.
For a system:
where,
= Initial mass and velocity
= Final mass and velocity
We are given:
Putting values in above equation, we get:
Hence, the velocity of released alpha particle is
Answer:
θ=180°
Explanation:
The problem says that the vector product of A and B is in the +z-direction, and that the vector A is in the -x-direction. Since vector B has no x-component, and is perpendicular to the z-axis (as A and B are both perpendicular to their vector product), vector B has to be in the y-axis.
Using the right hand rule for vector product, we can test the two possible cases:
- If vector B is in the +y-axis, the product AxB should be in the -z-axis. Since it is in the +z-axis, this is not correct.
- If vector B is in the -y-axis, the product AxB should be in the +z-axis. This is the correct option.
Now, the problem says that the angle θ is measured from the +y-direction to the +z-direction. This means that the -y-direction has an angle of 180° (half turn).
Answer:
F = 69.5 [N]
Explanation:
We must remember that the friction force is defined as the product of the normal force by the coefficient of friction, and it can be calculated by the following expression.
where:
N = normal force [N]
miu = friction coefficient
f = friction force = 22 [N]
Now we must calculate the force exerted by means of Newton's second law which tells us that the sum of forces on a body is equal to the product of mass by acceleration.
where:
F = force exerted [N]
f = friction force [N]
m = mass = 95 [kg]
a = acceleration = 0.5 [m/s²]
Now replacing:
Rust forms when oxygenreacts with chemicals in rocks, and that is often the case