Answer:
hello your question is incomplete attached below is the complete question
answer :
a) I1 = I2
b) J1 > J2
c) E 1 > E2
d) ( vd1 ) > ( vd2 )
Explanation:
a) The currents in the two segments are the same i.e. I1 = I2 and this is because the segments are connected in series
b) Comparing the current densities J1 and J2 in the two segments
note : current density ∝ 1 / area
The area of the second segment is > the area of first segment therefore
J1 > J2
J1 ( current density of first segment )
J2 ( current density of second segment )
c) Comparing the electric field strengths E1 and E2
note : electric field strength ∝ current density
since current density of first segment is > current density of second segment and conductivity of the materials are the same hence
E 1 > E2
d) Comparing the drift speeds Vd1 and Vd2
( vd1 ) > ( vd2 )
this because ; vd ∝ current density
Answer:
speed = distance/time
Explanation:
speed = 150/30
speed =5m/s
you were running fast .....5m/s is a good speed
B. +Q, + W are the correct sign
Answer:
ΔE = 37.8 x 10^9 J
Explanation:
The energy required will increased the potential energy and increase the kinetic energy.
As the altitude change is fairly small compared to the earth radius, we can ASSUME that the average gravity will be a good representative
Gravity acceleration at altitude would be 9.8(6400²/8000²) = 6.272 m/s²
G(avg) = (9.8 + 6.272)/2 = 8.036 m/s²
ΔPE = mG(avg)Δh = 1000(8.036)(8e6 - 6.4e6) = 12.857e9 J
The centripetal force at orbit must be equal to the gravity force
mv²/R = mg'
v²/8.0e6 = 6.272
v² = (6.272(8.0e6)) = 50.2e6 m²/s²
The maximum velocity when resting on earth at the equator is about 460 m/s.
The change in kinetic energy is
ΔKE = ½m(vf² - vi²)(1000)
ΔKE = ½(1000)(50.2e6 - 460²) = 25e9 J
Total energy increase is
25e9 + 12.857e9 = 37.8e9 J
<h2>The frequency of driver is 700 Hz</h2>
Explanation:
The frequency of wave in a string is given by the relation
n =
here n is the frequency
p is the number of antinodes and l is the length of string .
T is the tension in string and m is the mass per unit length
Thus 420 = I
Now if there is 5 antinodes , the value of p = 5
Thus n = II
Dividing II by I , we have
n/420 = 5/3
or n = 5/3 x 420 = 700 Hz