Answer:
A) the ammeter is x
B)
- voltage across R₁ (left resistor) = 0.75 V
- voltage across the right one = 0.3 V
C) 1.05 V
Explanation:
From the diagram attached below;
A) Assuming the homes were wired in series, and one of the homes face short circuit then all the houses would face power cut but it doesn't happen. So they must be connected in parallel.
Therefore; The ammeter is connected in series, Hence, the ammeter is x and the voltmeter must be z.
B)
Given that:
x = 0.15 A
z = 0.3 V
Resistor (R) on the left = 5 ohms
Then, voltage across R₁ (left resistor) = 5×(x)
= 5×0.15
= 0.75 V
voltage across the right one = z = 0.3 V
C)
The total voltage of battery = 0.75+0.3 = 1.05 V
Explanation:
First we will convert the given mass from lb to kg as follows.
157 lb =
= 71.215 kg
Now, mass of caffeine required for a person of that mass at the LD50 is as follows.
= 12818.7 mg
Convert the % of (w/w) into % (w/v) as follows.
0.65% (w/w) =
=
=
Therefore, calculate the volume which contains the amount of caffeine as follows.
12818.7 mg = 12.8187 g =
= 1972 ml
Thus, we can conclude that 1972 ml of the drink would be required to reach an LD50 of 180 mg/kg body mass if the person weighed 157 lb.
Answer:
13.78 mT
Explanation:
The peak voltage ε = ωNAB where ω = angular speed of coil = 1500 rpm = 1500 × 2π/60 rad/s = 50π rad/s = 157.08 rad/s, N = number of turns of coil = 250, A = area of coil = πr² where r = radius of coil = 10 cm = 0.10 m,
A = π(0.1 m)² = 0.03142 m² and B = magnetic field strength
So,
B = ε/ωNA
substituting the values of the variables into the equation given that ε = 17 V
So, B = ε/ωNA
B = 17 V/(157.08 rad/s × 250 turns × 0.03142 m²)
B = 17 V/(1233.8634 rad-turns-m²/s)
B = 0.01378 T
B = 13.78 mT
The final velocity of the composite object is 6/5 m/sec.
<h3>
what is velocity?</h3>
- Velocity is the direction at which an item is moving and serves as a measure of the rate at which its location is changing as seen from a certain point of view and as measured by a specific unit of time (for example, 60 km/h northbound).
- In kinematics, the area of classical mechanics that deals with the motion of bodies, velocity is a basic idea.
- A physical vector quantity called velocity must have both a magnitude and a direction in order to be defined.
- Speed is the scalar absolute value (magnitude) of velocity; it is a coherent derived unit whose quantity is measured in metres per second (m/s or m/s1) in the SI (metric system).
To learn more about the topic, refer to the following link:
brainly.com/question/80295?source=archive
#SPJ4