Answer
The dedicated graphics card is used when performing hardware-intensive tasks so as to ensure efficiency and balanced performance. However, it uses more power and thus produces more heat. When the cooling system is not sufficient or the room is not well ventilated, your PC begins to overheat while playing games. Explanation: How does the second law of thermodynamics relate to the direction of heat flow? Heat of itself never flows from a cold object to a hot object. ... The second law expresses the maximum efficiency of a heat engine in terms of hot and cold temperatures. one of these answers i am not sure
Answer:
0.9
Explanation:
h = 400 mm, h' = 325 mm
Let the coefficient of restitution be e.
h' = e^2 x h
325 = e^2 x 400
e^2 = 0.8125
e = 0.9
Answer:
basically they have too much mass in them
Explanation:
They are held tightly together by strong forces of attraction. They are held in fixed positions but they do vibrate. Because the particles don't move, solids have a definite shape and volume, and can't flow. Because the particles are already packed closely together, solids can't easily be compressed.
I believe Intangibility is the answer! :P I hope this helps!
Incomplete question.The Complete question is here
A flat uniform circular disk (radius = 2.00 m, mass = 1.00 ✕ 102 kg) is initially stationary. The disk is free to rotate in the horizontal plane about a friction less axis perpendicular to the center of the disk. A 40.0-kg person, standing 1.25 m from the axis, begins to run on the disk in a circular path and has a tangential speed of 2.00 m/s relative to the ground.
a.) Find the resulting angular speed of the disk (in rad/s) and describe the direction of the rotation.
b.) Determine the time it takes for a spot marking the starting point to pass again beneath the runner's feet.
Answer:
(a)ω = 1 rad/s
(b)t = 2.41 s
Explanation:
(a) initial angular momentum = final angular momentum
0 = L for disk + L............... for runner
0 = Iω² - mv²r ...................they're opposite in direction
0 = (MR²/2)(ω²) - mv²r
................where is ω is angular speed which is required in part (a) of question
0 = [(1.00×10²kg)(2.00 m)² / 2](ω²) - (40.0 kg)(2.00 m/s)²(1.25 m)
0=200ω²-200
200=200ω²
ω = 1 rad/s
b.)
lets assume the "starting point" is a point marked on the disk.
The person's angular speed is
v/r = (2.00 m/s) / (1.25 m) = 1.6 rad/s
As the person and the disk are moving in opposite directions, the person will run part of a revolution and the turning disk would complete the whole revolution.
(angle) + (angle disk turns) = 2π
(1.6 rad/s)(t) + ωt = 2π
t[1.6 rad/s + 1 rad/s] = 2π
t = 2.41 s