Answer:
31.75 m/s
Explanation:
h = 41.7 m
Let the initial velocity of the second stone is u
Let the time taken to reach to the bottom by the first stone is t then the time taken by the second stone to reach the ground is t - 1.8.
For first stone:
Use second equation of motion
Here, u = 0, g = 9.8 m/s^2 and t be the time and h = 41.7
So, 41.7= 0 + 0.5 x 9.8 x t^2
41.7 = 4.9 t^2
t = 2.92 s ..... (1)
For second stone:
Use second equation of motion
Here, g = 9.8 m/s^2 and time taken is t - 1.8 = 2.92 - 1.8 = 1.12 s, h = 41.7 m and u be the initial velocity
.... (2)
By equation the equation (1) and (2), we get
u = 31.75 m/s
Answer:
D
Explanation:
I just had this question the answer is D
Answer:
Use the ammeter to measure the current that flows through each wire, because a larger current that flows through the wire corresponds to a smaller resistivity
Explanation:
Since they are connected to a constant voltage power source, the potential difference does not change. The potential difference is proportional to the product of the current and the resistance and, the resistance opposes the flow of electric current. It is clear to see that a large current that flows through the current means there is a lesser resistance to the flow of current at constant potential difference across the circuit.
Rolling friction .<span> the force that slows down the movement of a rolling object</span>
sliding friction.
Sliding friction : The opposing force that comes into play when
one body is actually sliding over the surface of the other body
is called sliding friction. e.g. A flat block is moving over a
horizontal table.
Kinetic or dynamic friction: If the applied force is increased further
and sets the body in motion, the friction opposing the motion is called
kinetic friction
It’s solved by using a pretty standard formula for efficiency.
