Answer:
Therefore the rate of corrosion 37.4 mpy and 0.952 mm/yr.
Explanation:
The corrosion rate is the rate of material remove.The formula for calculating CPR or corrosion penetration rate is
K= constant depends on the system of units used.
W= weight =485 g
D= density =7.9 g/cm³
A = exposed specimen area =100 in² =6.452 cm²
K=534 to give CPR in mpy
K=87.6 to give CPR in mm/yr
mpy
=37.4mpy
mm/yr
=0.952 mm/yr
Therefore the rate of corrosion 37.4 mpy and 0.952 mm/yr.
Answer:
a) 2.063*10^-4
b) 1.75*10^-4
Explanation:
Given that: d= 1.628 mm = 1.628 x 10-3 I= 12 mA = 12.0 x 10-8 A The Cross-sectional area of the wire is:
a) <em>The Potential difference across a 2.00 in length of a 14-gauge copper </em>
<em> wire: </em>
L= 2.00 m
From Table Copper Resistivity = 1.72 x 10-8 S1 • m The Resistance of the Copper wire is:
=0.0165Ω
The Potential difference across the copper wire is:
V=IR
=2.063*10^-4
b) The Potential difference if the wire were made of Silver: From Table: Silver Resistivity p= 1.47 x 10-8 S1 • m
The Resistance of the Silver wire is:
=0.014Ω
The Potential difference across the Silver wire is:
V=IR
=1.75*10^-4
Answer:
1. Density = 1200[kg/m^3]; 2. Volume= 0.005775[m^3], mass= 15.59[kg]
Explanation:
1. We know that the density is defined by the following expression.
2. First we need to convert the units to meters.
wide = 35[cm] = 35/100 = 0.35[m]
long = 11 [dm] = 11 decimeters = 11/10 = 1.1[m]
Thick = 15[mm] = 15/1000 = 0.015[m]
Now we can find the density using the expression for the density.