Ask question

Ask question

All categories

2 years ago

11

Question 5 of 10

2 answers:

vladimir1956 [14]2 years ago

7 0

Answer:

Solar eclipse

Explanation

Alex_Xolod [135]2 years ago

6 0

Answer:

Neap Tide

Explanation:

A-P-E-X

You might be interested in

You wish to measure the iron content of the well water on the new property you are about to buy. You prepare a reference standar

djverab [1.8K]

1.04 ⨯ 10 $^{-4}$ M

<h3>Explanation</h3>

<em>A</em> = <em>ε</em> $\cdot l \cdot c$ by the Beer-Lambert law, where

<em>A</em> the absorbance,
$l$ the path length,
<em>ε</em> the molar absorptivity of the solute, and
$c$ concentration of the solution.

<em>A</em> and <em>ε </em>are the same for both solutions. Therefore, $l \cdot c$ is constant; $l$ is inversely proportional to $c$ . The 100 mL sample would have a concentration 1/4.78 times that of the 45.0 mL reference.

The 13.0 mL standard solution has a concentration of 5.17 ⨯ $10^{-4}$ M. Diluting it to 45.0 mL results in a concentration of $5.17 \times 10^{-4} \times \frac{13.0}{45.0} =$ 1.494 M.

$c$ is inversely related to $l$ for the two solutions. As a result, c₂ = $c_1 \cdot \frac{l_1}{l_2} = 1.494 \times 10^{-4} \times \frac{1}{4.78} =$ 3.126 M.

The 30.0 mL sample has to be diluted by 30.0 / 100.0 times to produce the 100.0 mL solution being tested. The 100.0 mL solution has a concentration of 3.126 M. Therefore, the 30.0 mL solution has a concentration of $3.126 \times \frac{100.0}{30.0} =$ 1.04 ⨯ $10^{-4}$ M.

6 0

2 years ago

What is a conversion factor?

Zarrin [17]

Answer: an arithmetical multiplier for converting a quantity expressed in one set of units into an equivalent expressed in another.

Explanation:

5 0

2 years ago

Read 2 more answers

Chloroform flows through a 4.26 inch inside-diameter pipe at the rate of 3.60 gallons per minute. What is the average velocity o

Pani-rosa [81]

Answer:

1) 0,081 ft/s

2) 0,746 lb/s

Explanation:

The relation between flow and velocity of a fluid is given by:

Q=Av

where:

Q, flow [ft3/s]
A, cross section of the pipe [ft2]
v, velocity of the fluid [ft/s]

1)

To convert our data to appropiate units, we use the following convertion factors:

1 ft=12 inches

1 ft3=7,48 gallons

1 minute=60 seconds

So,

$Q=\frac{3,60 gallons}{1 min}*\frac{1min}{60 s}*\frac{1ft3}{7,48gallons}=0,00802 \frac{ft3}{s}$

As the pipe has a circular section, we use A=πd^2/4:

$d=4,26 inch *\frac{1ft}{12 inch}=0,355ft\\ A=\pi \frac{0,355^{2} }{4}=0,0989ft2$

Finally:

Q=vA......................v=Q/A

$v=\frac{0,00802ft^{3} /s}{0,0989ft^{2} }=0,081ft/s$

2)

The following formula is used to calculate the specific gravity of a material:

SG = ρ / ρW

where:

SG = specific gravity,

ρ = density of the material [lb/ft3]

ρW = density of water [lb/ft3] = 62.4 lbs/ft3

then:

ρ = SG*ρW = 1,49* 62,4 lb/ft3 = 93 lb/ft3

To calculate the mass flow, we just use the density of the chloroform in lb/ft3 to relate mass and volume:

$0,00802 \frac{ft3}{s}*\frac{93lb}{1ft3}=0,746lb/s$

7 0

2 years ago

When two compounds are made up of the same number and kind of atoms, but differ in their molecular structure they are known as?

erastovalidia [21]

They are the price of non ya business

4 0

2 years ago

Name a property copper has?

Ilya [14]

Answer:

Explanation:

It is malleable, ductile, and a good conductor of electricity and heat.

4 0

1 year ago