All categories

1 year ago

The current through one resistor in a parallel resistor circuit is always (need help ASAP)

Physics

1 answer:

Stells [14]1 year ago

3 0

Answer:

d. less than the total current in the circuit

You might be interested in

Newtons laws of motion

Viktor [21]

Answer:

Law 1. A body continues in its state of rest, or in uniform motion in a straight line, unless acted upon by a force.

Law 2. A body acted upon by a force moves in such a manner that the time rate of change of momentum equals the force.

Law 3. If two bodies exert forces on each other, these forces are equal in magnitude and opposite in direction.

7 0

2 years ago

which type of wave spreading do you think causes faster energy loss-two-dimensional or three-dimensional? explain.

sdas [7]

Three dimensional would loose faster

3 0

2 years ago

Read 2 more answers

A plastic film moves over two drums. During a 4-s interval the speed of the tape is increased uniformly from v0 = 2ft/s to v1 =

Ratling [72]

Answer:

Question 1)

a) The speed of the drums is increased from 2 ft/s to 4 ft/s in 4 s. From the below kinematic equations the acceleration of the drums can be determined.

$v_1 = v_0 + at \\4 = 2 + 4a\\a = 0.5~ft/s^2$

This is the linear acceleration of the drums. Since the tape does not slip on the drums, by the rule of rolling without slipping,

$v = \omega R\\a = \alpha R$

where α is the angular acceleration.

In order to continue this question, the radius of the drums should be given.

Let us denote the radius of the drums as R, the angular acceleration of drum B is

α = 0.5/R.

b) The distance travelled by the drums can be found by the following kinematics formula:

$v_1^2 = v_0^2 + 2ax\\4^2 = 2^2 + 2(0.5)x\\x = 12 ft$

One revolution is equal to the circumference of the drum. So, total number of revolutions is

$x / (2\pi R) = 6/(\pi R)$

Question 2)

a) In a rocket propulsion question, the acceleration of the rocket can be found by the following formula:

$a = \frac{dv}{dt} = -\frac{v_{fuel}}{m}\frac{dm}{dt} = -\frac{13000}{2600}25 = 125~ft/s^2$

b) $a = -\frac{v_{fuel}}{m}\frac{dm}{dt} = - \frac{13000}{400}25 = 812.5~ft/s^2$

5 0

2 years ago

A 37 cm long solenoid, 1.8 cm in diameter, is to produce a 0.50 T magnetic field at its center. If the maximum current is 4.4 A,

taurus [48]

Answer:

33,458.71 turns

Explanation:

Given: L = 37 cm = 0.37 m, B= 0.50 T, I = 4.4 A, n= number of turn per meter

μ₀ = Permeability of free space = 4 π × 10 ⁻⁷

Solution:

We have B = μ₀ × n × I

⇒ n = B/ (μ₀ × I)

n = 0.50 T / ( 4 π × 10 ⁻⁷ × 4.4 A)

n = 90,428.94 turn/m

No. of turn through 0.37 m long solenoid = 90,428.94 turn/m × 0.37

= 33,458.71 turns

8 0

2 years ago

Read 2 more answers

What is the work behind these answers?

Sati [7]

I think you need to solve them

7 0

2 years ago