Answer:
The correct answer to the question is (A)
When it hits the heavy rope, compared to the wave on the string, the wave that propagates along the rope has the same (A) frequency
Explanation:
The speed of a wave in a string is dependent on the square root of the tension ad inversely proportional to the square root of the linear density of the string. Generally, the speed of a wave through a spring is dependent on the elastic and inertia properties of the string
Therefore if the linear density of the heavy rope is four times that of light rope the velocity is halved and since
v = f×λ therefore v/2 = f×λ/2
Therefore the wavelength is halved, however the frequency remains the same as continuity requires the frequency of the incident pulse vibration to be transmitted to the denser medium for the wave to continue as the wave is due to vibrating particles from a source for example
Suvat
we have s, u, v and we want a
the suvat equation with these values in is: v^2 = u^2 - 2as
so a = (-v^2 + u^2)/-2s
plug numbers in
a = (-85^2 + 0^2)/-2*36 = 7225/72 = 100.3... ms^-2
White is a hotter color so it burns faster. :)
Answer: A voltmeter must have a high resistance where as an ammeter must have a low resistance.
Explanation:
A voltmeter is a device which is connected in parallel to the component across which voltage needs to be measured. In a parallel circuit voltage drop is same at the nodes. The parallel connection must not offer easier path for current to divert from the main circuit and travel. Thus, a voltmeter must have high resistance.
On the other hand, an ammeter which is used to measure current in the circuit must have low resistance as it is connected in series. It should not offer resistance as it would reduce the actual current and measurement would be inaccurate.