0.02020 ohm is the resistance of a carbon rod at 25.8 ∘C if its resistance is 0.0200 Ω at 0.0 ∘C.
<h3 /><h3>What is a resistor?</h3>
A resistor is an electrical component that controls or restricts how much electrical current can pass across a circuit in an electronic device. A specified voltage can be supplied via resistors to an active device like a transistor.
The temperature of the resistor varies based on the variation in the temperature. The equation that describes the relationship between the two of them is:
R = R0[1+ alpha(T-T0)] where:
R is the new resistance we are looking for
alpha is the temperature coefficient of resistance. For carbon rod, alpha = ₋ 4.8 x (1/°c)
T0 is the standard temperature =25.8°C
R0 is the resistance at T0 = 0.0200 ohms
T is the temperature at which we want to get R = 0
Substitute in the equation to get R as follows:
R = 0.0200 [1+( ₋ 4.8 x ) (0-25.8)] = 0.02020 ohm
To know more about resistance refer to: brainly.com/question/11431009
#SPJ1
Answer:
- quality factor (Q) = 69.99
- inductor = 1.591 x 10⁻⁴ H
- capacitor = 3.248 x 10⁻¹⁰ F
Explanation:
Given;
resonance frequency (F₀) = 700 kHz
resistor, R = 10 Ohm
bandwidth (BW) = 10 kHz
bandwidth (BW)
make L (inductor) the subject of the formula
make C (capacitor) the subject of the formula
quality factor (Q)
quality factor (Q) = 69.99
Answer:
radius comes out to be 3 m
height of the cylinder comes out to be 3m
Explanation:
given
volume of cylinder = 27π m³
π r² h = 27π
r² h = 27.............(1)
surface area of cylinder open at the top
S = 2πrh + π r²
for least amount of material requirement.
hence radius comes out to be 3 m
for height put the value in the equation 1
so, height of the cylinder comes out to be 3m
It will sink because it is heavier. The density of water 1.00 g/ml