R is proportional to the length of the wire:
R ∝ length
R is also proportional to the inverse square of the diameter:
R ∝ 1/diameter²
The resistance of a wire 2700ft long with a diameter of 0.26in is 9850Ω. Now let's change the shape of the wire, adding and subtracting material as we go along, such that the wire is now 2800ft and has a diameter of 0.1in.
Calculate the scale factor due to the changed length:
k₁ = 2800/2700 = 1.037
Scale factor due to changed diameter:
k₂ = 1/(0.1/0.26)² = 6.76
Multiply the original resistance by these factors to get the new resistance:
R = R₀k₁k₂
R₀ = 9850Ω, k₁ = 1.037, k₂ = 6.76
R = 9850(1.037)(6.76)
R = 69049.682Ω
Round to the nearest hundredth:
R = 69049.68Ω
C.) i believe because the change in shape is changing the physical appearance
Answer:
At time 10.28 s after A is fired bullet B passes A.
Passing of B occurs at 4108.31 height.
Explanation:
Let h be the height at which this occurs and t be the time after second bullet fires.
Distance traveled by first bullet can be calculated using equation of motion
Here s = h,u = 450m/s a = -g and t = t+3
Substituting
Distance traveled by second bullet
Here s = h,u = 600m/s a = -g and t = t
Substituting
Solving both equations
So at time 10.28 s after A is fired bullet B passes A.
Height at t = 7.28 s
Passing of B occurs at 4108.31 height.
Answer:
Toasting in a toaster is usually considered by (infra red) radiation. But the hot coils touch the toast so an element of heating by conduction occurs as well.
Explanation:
Answer:
the length of the wire is 134.62 m.
Explanation:
Given;
resistivity of the copper wire, ρ = 2.6 x 10⁻⁸ Ωm
cross-sectional area of the wire, A = 35 x 10⁻⁴ cm² = ( 35 x 10⁻⁴) x 10⁻⁴ m²
resistance of the wire, R = 10Ω
The length of the wire is calculated as follows;
Therefore, the length of the wire is 134.62 m.