Answer:
c. length of the wall or column and the rate of placement of the concrete
Explanation:
when designing for wall and column form-works, it is of utmost important to know the length of the wall and the type of concrete placement to be used.
Concrete placement has methods and precaution to be taken when doing the form work
if the concrete placement is manually (hand or funnel) the form work height should not be more than 1 m to enable easy compaction and vibration of concrete in the form.
Also, if the form work length is too long and it is not well reinforced, it tends to burg if the force apply during concrete placement or during vibration is much.
<h2>
a)Acceleration due to gravity on the surface of the Sun is 274.21 m/s²</h2><h2>b)
Factor of increase in weight is 27.95</h2>
Explanation:
a) Acceleration due to gravity
Here we need to find acceleration due to gravity of Sun,
G = 6.67259 x 10⁻¹¹ N m²/kg²
Mass of sun, M = 1.989 × 10³⁰ kg
Radius of sun, r = 6.957 x 10⁸ m
Substituting,
Acceleration due to gravity on the surface of the Sun = 274.21 m/s²
b) Acceleration due to gravity in earth = 9.81 m/s²
Ratio of gravity = 274.21/9.81 = 27.95
Weight = mg
Factor of increase in weight = 27.95
PV=nRT
(P)(.010)=(n)(.08201)(0)
(v1/t1)=(v2/t2)
(.010/t1)=(v2/0)
The volume would be zero
Answer:
Option B.
Explanation:
Assuming the stick is in vertical position, its shadow depends on two factors: its length and the angle between the sun rays and the stick. When the angle is bigger, the lenght of the shadow increases, and vice versa. So, when the sun rays are parallel to the stick, the shadow may be small. Since they are nearly perpendicular to the Earth's surface at 12 o'clock, the shadow of the stick at that time should be minimal. It means that the measured shadow of 75 cm at 12:30 p.m. is almost impossible (Option B).
Answer:
Find the list below.
Explanation:
Energy conversion imply the transformation of energy from one form to another. Examples of these conversions in my home include the following:
1. Chemical energy stored in food is converted to mechanical energy used in working(example sweeping)
2. Chemical energy stored in batteries are used to produce sound energy from the radio.
3. Electrical energy flowing through the wires are used to provide heat energy from the heating device.
4. Electric energy stored in the fan is converted to kinetic energy.
5. Chemical energy stored in petrol is converted to mechanical and electrical energies in the generator.
6. Electric energy supplied by the electric gas cooker is used to generate thermal energy after heating water.
7. Electrical energy flowing through the wires supply light energy in the bulbs.
8. Electric energy is converted to light and sound energy in the televisions.
9. Light energy from the sun is converted to chemical energy in the plants at the garden.
10. Electric energy is converted to sound and light energy in the kitchen blender.