Answer:
______________________________
106/120 = .8833 complaints per hour i think.
______________________________
Answer: 2.2 meters
Step-by-step explanation:
The data is:
The initial piece is 6.35 meters long.
We cut 25 pieces of 16.2cm each, so in pieces only we have:
25*16.2cm = 405cm
1m = 100cm
Then: 405cm = (405/100) m = 4.05m
And each time that we cut a piece, we have 4mm of waste.
Then we have 25 times the 4mm of waste, this means that the total waste is:
4mm*25 = 100mm
and 1000mm = 1m
100mm = (100/1000) m = 0.1m
So the total amount that was cut is:
4.05m + 0.1m = 4.15m
The length in the channel iron will be: 6.35m - 4.15m = 2.2 meters
answer
(x+7)^2 + (y-4)^2 = 64
set up equation
the equation of a circle is (x - h)^2 + (y - k)^2 = r^2
where h is the center x coordinate and k is the center y coordinate
values
from the point (-7,4) we know that h = -7 and k = 4
since the radius is 8, r^2 = 8^2 = 64
plug in values
now that we have all the values, we plug them into (x - h)^2 + (y - k)^2 = r^2
(x - h)^2 + (y - k)^2 = r^2
(x - (-7))^2 + (y-4)^2 = 64
(x+7)^2 + (y-4)^2 = 64
Answer:
The answer will be listed below.
Step-by-step explanation:
To graph the equation, first mark down your y-intercept which would be 5. Look at the y-axis and put a dot on 5. Now you must graph the slope of the line. To graph the slope, you would use rise/run (1/3). You would start on 5 and go up one and to the right three times. Keep repeating the process until you run out. Now draw the line through the dots and you did it!
The answer to this question is E.
