Answer:
So to increase current of the circuit what you can do is :
1. Use conductor of low resistivity, ¶.
2. Use conductor of small length.
3. Use thick wire.
4. Decrease the temperature of the circuit.
5. If operating temprature is high than use semiconductor, because it have negative temprature coefficient.
6. Minimise the circuit losses.
Answer:
(B) cash inflows are moved earlier in time.
Explanation:
The payback period stated time-frame during which the initial amount of investment should be recovered. It is expressed in the year form
The formula to compute the payback period is shown below:
Payback period = Initial investment ÷ Net cash flow
where,
The net cash flow = annual net operating income + depreciation expenses
The payback period of the project decreases when the accumulated starting year cash flows increases that results the movement of the cash inflows earlier in time
The answer is C. p=mv p=18x30 = 540kgm/s
Boron Group
elements have three valence electrons and are fairly reactive. All of them are solids at room temperature. Boron is a very hard, black metalloid with a high melting point.
Answer:
Explained below
Explanation:
To explain this, let's consider a tennis ball being launched from the top of a very high building.
Now, if the tennis ball is launched horizontally without any upward angle but with an initial velocity of 10 m/s. In this motion, If there is no gravity, the tennis ball would continue in motion at that same speed of 10 m/s in the horizontal direction. However, in reality, gravity causes the tennis ball to accelerate downwards at a rate of 9.8 m/s for every second. This implies that the vertical velocity component is changing at the rate of 9.8 m/s every second.
Thus, after 1 second, horizontal velocity component will remain 10 m/s and vertical component will be 9.8 m/s × 1 = 9.8 m/s downwards.
Also, after 2 seconds, the vertical velocity component will remain 10 m/s, however the vertical component will now be 9.8 × 2 = 19.6 m/s downwards.
Same procedure is repeated as t increases by 1 second.
