Answer:
There is a loss of fluid in the container of 0.475L
Explanation:
To solve the problem it is necessary to take into account the concepts related to the change of voumen in a substance depending on the temperature.
The formula that describes this thermal expansion process is given by:
Where,
Change in volume
Initial Volume
Change in temperature
coefficient of volume expansion (Coefficient of copper and of the liquid for this case)
There are two types of materials in the container, liquid and copper, so we have to change the amount of Total Volume that would be subject to,
Where,
= Change in the volume of liquid
= Change in the volume of copper
Then replacing with the previous equation we have:
Our values are given as,
Thermal expansion coefficient for copper and the liquid to 20°C is
Replacing we have that,
Therefore there is a loss of fluid in the container of 0.475L
Answer:
ΔL = 0.66 m
Explanation:
The change in length on an object due to rise in temperature is given by the following equation of linear thermal expansion:
ΔL = αLΔT
where,
ΔL = Change in Length of the bridge = ?
α = Coefficient of linear thermal expansion = 11 x 10⁻⁶ °C⁻¹
L = Original Length of the Bridge = 1000 m
ΔT = Change in Temperature = Final Temperature - Initial Temperature
ΔT = 40°C - (-20°C) = 60°C
Therefore,
ΔL = (11 x 10⁻⁶ °C⁻¹)(1000 m)(60°C)
<u>ΔL = 0.66 m</u>
Because of the pole and the generator you would have to biuld
Pressure = Force/ Area = 3000/2 = 1500 pascal.
It depends on the steady-state frequency. At zero frequency an inductor behaves like an open circuit. As the frequency increases, the inductor acts more like an open circuit and a capacitator acts more like a short circuit
