<h3>☯ <u>By using formula of Lens</u> </h3>
<h3>☯ <u>Now, Finding the magnification </u></h3>
<h3>☯ <u>Hence</u>,
</h3>
Answer:
T = 60 s
Explanation:
There are 6 poles on the track which are equally spaced
so the angular separation between the poles is given as
so the angular speed of the train is given as
now we have time period of the train given as
Just divide the two numbers with each other.
I mean 13/1.4=9.2857...
Throw it sideways and try to make it spin around but it needs to be thrown high up then it should kinda glide down
Answer: 313920
Explanation:First, we’re going to assume that the top of the circular plate surface is 2 meters under the water. Next, we will set up the axis system so that the origin of the axis system is at the center of the plate.
Finally, we will again split up the plate into n horizontal strips each of width Δy and we’ll choose a point y∗ from each strip. Attached to this is a sketch of the set up.
The water’s surface is shown at the top of the sketch. Below the water’s surface is the circular plate and a standard xy-axis system is superimposed on the circle with the center of the circle at the origin of the axis system. It is shown that the distance from the water’s surface and the top of the plate is 6 meters and the distance from the water’s surface to the x-axis (and hence the center of the plate) is 8 meters.
The depth below the water surface of each strip is,
di = 8 − yi
and that in turn gives us the pressure on the strip,
Pi =ρgdi = 9810 (8−yi)
The area of each strip is,
Ai = 2√4− (yi) 2Δy
The hydrostatic force on each strip is,
Fi = Pi Ai=9810 (8−yi) (2) √4−(yi)² Δy
The total force on the plate is found on the attached image.