Starting with a new moon, name the phases the moon will pass through before the next new moon.

What are two ways an engineer can build a car in order for it to accelerate faster

Ket [755]

Explanation:

Take F=ma

a = F/m

For a higher, F higher or m lower

Means higher horse power for engine or lower mass for the car

4 0

1 year ago

An isolated conducting sphere has a 17 cm radius. One wire carries a current of 1.0000020 A into it. Another wire carries a curr

notsponge [240]

14 ms is required to reach the potential of 1500 V.

<u>Explanation:</u>

The current is measured as the amount of charge traveling per unit time. So the charge of electrons required for each current is determined as the product of current with time.

$Charge = Current \times Time$

As two different current is passing at two different times, the net charge will be the different in current. So,

$\text { Charge }=(1.0000020-1.0000000) \times t=2 \times 10^{-6} \times t$

The electric voltage on the surface of cylinder can be obtained as the ratio of charge to the radius of the cylinder.

$V=\frac{k q}{R}$

Here $k = 9 * 10^9$ , q is the charge and R is the radius. As $q=2 \times 10^{-6} \times t$ and R =17 cm = 0.17 m, then the voltage will be

$V=\frac{9 \times 10^{9} \times 2 \times 10^{-6} \times t}{0.17}$

The time is required to find to reach the voltage of 1500 V, so

$1500 =\frac{9 \times 10^{9} \times 2 \times 10^{-6} \times t}{0.17}$

$\begin{aligned}&t=\frac{1500 \times 0.17}{\left(9 \times 10^{9} \times 2 \times 10^{-6}\right)}\\&t=14.1666 \times 10^{-3} s=14\ \mathrm{ms}\end{aligned}$

So, 14 ms is required to reach the potential of 1500 V.

3 0

2 years ago

A very long conducting cylinder (length L) of radius R(R<R and (b)r

mina [271]

Answer:

Explanation:

We have to find electric potential V at a distance r.

a) For r>R,

The electric field in the cylinder is given by

E.A equating it to the other electric field given by

б.A/ε₀

Here the area of cylinder is given by= 2*3.14*r*L

While for the outside, the area= 2*3.14*R*L

Equating both, we get

E= бR/rε₀

Now,

The potential difference is given as:

ΔV= -бR/rε₀ and integrating right side with respect to dr under limits r and R.

Where ΔV= V₀-V

So solving we get

V₀=V-бR/ε₀ln (r/R)

b) For r<R i.e. inside the cylinder

There will be no electric field produced as E=0

So ultimately Vin= V

c) V=0 at r= infinity.

4 0

2 years ago

A marshmallow is dropped from a 5.71 meter high pedestrian bridge, and 0.921 seconds later, it lands right on the head of an uns

Natalka [10]

let the height of the person with marshmallow on her head be "h"

consider the motion of the marshmallow after it is dropped from bridge.

Y₀ = initial position of the marshmallow above the ground = 5.71 m

Y = final position of marshmallow on head of person = h

v₀ = initial velocity of the marshmallow = 0 m/s

a = acceleration due to gravity = - 9.8 m/s²

t = time of travel for marshmallow = 0.921 sec

Using the kinematics equation

Y = Y₀ + v₀ t + (0.5) a t²

inserting the values

h = 5.71 + 0 (0.921) + (0.5) (-9.8) (0.921)²

h = 5.71 - 4.16

h = 1.55 m

5 0

2 years ago

THREE-DIMENSIONAL THINKING

ANEK [815]

The presence of potential energy between particles supports the shape of a heating curve.

<h2>Potential energy and heating curve</h2>

The existence of potential energy between particles supports the shape of a heating curve because potential energy causes the heating curve flat as well as in curve form. The heating curves show how the temperature changes as a substance is heated up.

The potential energy of the molecules will increase anytime energy is being supplied to the system but the temperature is not increasing so when the heating curve go flat it means there is potential energy so we can conclude that the existence of potential energy between particles supports the shape of a heating curve.

Learn more about heating curve here: brainly.com/question/11991469

Learn more: brainly.com/question/26153233

8 0

2 years ago