La longitud del faldón de la rampa es de 5.4 m.
La pendiente expresada en porcentaje sigue la siguiente ecuación:
(1)
Donde:
- y es la elevacion de la rampa (faldón)
- x es la longitud de la ramapa (20 m)
Sabemos que la pendiente es de 27%. Por lo tanto, usando la ecuación 1, despejamos y.
La longitud del faldón es 5.4 m
Pudes ver más sobre el tema aquí:
brainly.com/question/8906330
Answer: touch the pan to the burner
Explanation:
There are three modes of heat transfer:
conduction, convection and radiation.
For conduction, the heat transfers from a hot object to a cold object when the two are in contact.
For convection there is bulk motion of fluid occurs which transfers the heat.
For heat transfer by radiation, medium is not required.
Thus, to demonstrate conduction between pan and burner, the pan must touch the burner.
Explanation:
TEMPLE HINDUS MOSQUE MUSLIMS TEMPLE HINDUS MOSQUE MUSLIMS
If I remember correctly (from my studies long time ago) the layers are from the outer to the center:
SiAl : Silicon-Aluminum
SiMa : Silicon-Magnesium (although should be Mg)
NiFe : Nickel-Iron
The SiMa layer should have the lightest elements (Magnesium is lighter than Aluminum)
Answer:
h=18.05 cm
Explanation:
Given that
m= 25 kg
K= 1300 N/m
x=26.4 cm
θ= 19.5 ∘
When the block just leave the spring then the speed of block = v m/s
From energy conservation
By putting the values
v=1.9 m/s
When block reach at the maximum height(h) position then the final speed of the block will be zero.
We know that
By putting the values
h=0.1805 m
h=18.05 cm