Answer:
649kg/m^3
Explanation:
Let p be the density of this particular object.
Formula for density:
We can substitute the givenmass and volume to find density of the object.
Therefore the density of this object is 649kg/m^3.
Answer: A thin membrane.
Explanation:
When a sound signal is allowed to pass through the voice coil suspended between permanent magnet, magnetic field will be induced which will cause vibration in the diaphragm - a thin membrane causing disturbance of air in the surrounding of membranes which eventually produce sound waves.
Therefore, we can conclude that a thin membrane of the loud speaker produces sound waves
Gravity is the attraction of every body to every other body due to the masses of each body. The larger the mass, the greater the force. It also depends on the distances: the closer the bodies, the greater the force. Gravity is directed toward the center of a body, and the distance is measured from the center.
When objects fall to the ground, gravity causes them to accelerate. Acceleration is a change in velocity, and velocity, in turn, is a measure of the speed and direction of motion. Gravity causes an object to fall toward the ground at a faster and faster velocity the longer the object falls.
Answer:
<em>The 6000 lines per cm grating, will produces the greater dispersion .</em>
Explanation:
A diffraction grating is an optical component with a periodic (usually one that has ridges or rulings on their surface rather than dark lines) structure that splits and diffracts light into several beams travelling in different directions.
The directions of the light beam produced from a diffraction grating depend on the spacing of the grating, and also on the wavelength of the light.
For a plane diffraction grating, the angular positions of principle maxima is given by
(a + b) sin ∅n = nλ
where
a+b is the distance between two consecutive slits
n is the order of principal maxima
λ is the wavelength of the light
From the equation, we can see that without sin ∅ exceeding 1, increasing the number of lines per cm will lead to a decrease between the spacing between consecutive slits.
In this case, light of the same wavelength is used. If λ and n is held constant, then we'll see that reducing the distance between two consecutive slits (a + b) will lead to an increase in the angle of dispersion sin ∅. So long as the limit of sin ∅ not greater that one is maintained.
Answer: First you must convert pound in kilogram, and feet in meter
Explanation:
To calculate momentum we use .
p=m*V
mass-m
speed-V
distance and time are used to calculate velocity(speed)
You are given :
mass- in pounds
for distance - in feet
before you do any calculation first you have to convert pounds in kilograms
and feet in meters.
