The answer to the given question above would be option B. If a topographic map included a 6,000 ft. mountain next to an area of low hills, the statement that best describe the contour lines on the map is this: <span>The contour lines around the mountain would be very close together. Hope this helps.</span>
Complete question:
A diver is 10 m below the surface of water. Calculate the pressure the fluid exerted on the diver. The acceleration of gravity is 9.8 m/s2 and the density of the water is 1000 kg/m3. Answer in units of Pa. Show your work.
Answer:
Tthe pressure the fluid exerted on the diver is 1.99 x 10⁵ Pa
Explanation:
Given;
density of water, ρ = 1000 kg/m³
diver's position below the surface of the water, h = 10 m
acceleration due to gravity, g = 9.8 m/s²
Let the atmospheric pressure, P₀ = 101325 Pa
The pressure 10 m below the surface of the water is calculated as;
P = P₀ + ρgh
P = 101325 Pa + (1000 x 9.8 x 10)Pa
P = 199325 Pa
P = 1.99 x 10⁵ Pa.
Therefore, the pressure the fluid exerted on the diver is 1.99 x 10⁵ Pa
Answer:
the cost to leave the lights on 24 hours a day for one year is 31,536 cents or 315.36 dollars
Explanation:
Given that;
P = 300 watts = 300/1000 = 0.3
t = 24hrs a day
In a calendar year, we have 365 days
so;
E = 0.3 × 365 × 24
E = 2628 KWh
given that; 1 KWh = 12 cent
then 2628 KWh is x
x = 2628 × 12
x = 31,536 cents or 315.36 dollars
Therefore, the cost to leave the lights on 24 hours a day for one year is 31,536 cents or 315.36 dollars
You can picture a sound wave a lot like a Slinky wave . . . a
thicker, compressed blob moving along the path, with thinner,
stretched-out places before and after it.
The thicker parts of a sound wave, where the air is more dense,
are called compressions.
The thinner parts of a sound wave, where the air is less dense,
are called rarefactions.
It will provide a clear picture of current system functions before any modifications or improvements are made is a benefit if they use the four-model approach.
<u>Option: D</u>
<u>Explanation:</u>
The four model approach is followed by number of analyst which showcase that they construct the physical and logical model of both current and new system. The most important advantage of such approach is it portrays transparent image of ongoing system, before one apply any modification or variation. This is necessary because the flaws which generated earlier in system may affect the SDLC phases and outcome of such process may result into unsatisfied user by paying additional cost. This can be avoided by taking additional steps which make it worth it. The major disadvantage of such approach is the added time and cost of constructing model in both current system.
