What happens to the diffraction pattern when the number of lines per centimeter of a diffraction grating is increased?

1 answer:

3 0

The separation between two neighboring vital maxima increments. As the quantity lines per centimeter expand, the detachment d between neighboring openings ends up noticeably littler. The point that determines primary maxima of a diffraction grinding is given by transgression = m/d, where is the wavelength and m = 0, 1, 2, 3. For settled estimations of m and the wavelength, this connection demonstrates that as d abatements, increments. For a settled screen area, this implies the separation between two neighboring chief maxima additionally increments.

You might be interested in

A 1.35 kg block at rest on a tabletop is attached to a horizontal spring having constant 19.8 n/m. the spring is initially unstr

Ket [755]

Horizontal force is applied to the object causing the spring to stretch. the acceleration of gravity is 9.8 m/s

7 0

2 years ago

One type of slingshot can be made from a length of rope and a leather pocket for holding the stone. The stone can be thrown by w

grigory [225]

Answer:

15.66 rad/s

Explanation:

The vertical motion and horizontal motion are independent of each other.

t = √ ( 2 s/ g) where t = time for the ball to reach the ground and s is the height of the cliff = 18.0 m

t = √ ( 36 / 9.81 ) = 1.916 secs

horizontal distance travel = ut where u is the horizontal velocity of the stone = 30 × r (radius)

tangential velocity V = angular velocity ( ω) × radius

distance traveled = ω × r × t = 30 × r

radius cancelled on both side

ω = 30 / 1.9156 = 15.66 rad/s

4 0

2 years ago

"what is the important measure from weather radar that gives the intensity of the precipitation?"

diamong [38]

The most important measure is awhips

8 0

2 years ago

A wrench 0.500 m long is applied to a nut with a force of 80.0 N. Because of the cramped space, the force must be exerted upward

riadik2000 [5.3K]

Answer:

Torque, $\tau=34.6\ N.m$

Explanation:

It is given that,

Length of the wrench, l = 0.5 m

Force acting on the wrench, F = 80 N

The force is acting upward at an angle of 60.0° with respect to a line from the bolt through the end of the wrench. We need to find the torque is applied to the nut. We know that torque acting on an object is equal to the cross product of force and distance. It is given by :

$\tau=Fr\ sin\theta$