Answer:
Some of the effects of a dam on the environment includes;
1) Increase in the amount of the greenhouse gases
2) Removal of the natural wetland and ocean carbon sinks
3) Disruption of the sources of nutrients in the ecosystem
4) Destruction of habitats
5) Raising of the sea levels and waste waters
6) Displace villages and communities
7) Dams have a potential to create flood risk
8) Dams lead to increased water loss due to evaporation and transpiration
9) Dams causes earthquakes
Explanation:
Dams are a source of renewable energy and are a means to prevent floods, however, dams can also have detrimental impact on the climate and the environment.
Answer:
80Ω
Explanation:
Resistance in a series circuit (when one resistor is after another in the same line) is calculated with the following equation
Total resistance = R1 + R2 + R3...Rn
Substitute in your values and solve for total resistance
Total resistance = 60 + 20 = 80Ω
Answer:
1.6 x 10⁻¹⁹ C
Explanation:
Let us arrange the charges in the ascending order and round them off as follows :-
1.53 x 10⁻¹⁹ C → 1.6x 10⁻¹⁹ C
3.26 x 10⁻¹⁹C → 3.2 x 10⁻¹⁹ C
4.66 x 10⁻¹⁹C → 4.8 x 10⁻¹⁹ C
5.09 x 10⁻¹⁹C → 4.8 x 10⁻¹⁹ C
6.39 x 10⁻¹⁹C → 6.4 x 10⁻¹⁹ C
The rounding off has been made to facilitate easy calculation to come to a conclusion and to accommodate error in measurement.
Here we observe that
2 nd charge is almost twice the first charge
3 rd and 4 th charges are almost 3 times the first charge
5 th charge is almost 4 times the first charge.
This result implies that 2 nd to 5 th charges are made by combination of the first charge ie if we take e as first charge , 2nd to 5 th charges can be written as 2e, 3e ,3e and 4e. Hence e is the minimum charge existing in nature and on electron this minimum charge of 1.6 x 10⁻¹⁹ C exists.
If your machine has a mechanical advantage of 2.5, then WHATEVER force you apply to the input, the force at the output will be 2.5 times as great.
If you apply 1 newton to the machine's input, the output force is
(2.5 x 1 newton) = 2.5 newtons.
If you apply 120 newtons to the machine's input, the output force is
(2.5 x 120 newtons) = 300 newtons.