Answer:
Times it by 40. That is the pattern.
That's a 33% increase.
I calculated this using the formula:
Where n = the new value (16 in your question), o = the old value (12 in your question) and the result is outputted as a percent increase. You can check that this is correct by finding 33% of 12, adding the result to 12, and checking that the result equals your "new" number.
Note that 33% is only an approximation as your question requires a number rounded to the nearest whole.
<u><em>Answer:</em></u>
The bird is approximately 9 ft high up in the tree
<u><em>Explanation:</em></u>
The required diagram is shown in the attached image
Note that the tree, the cat and the ground form a right-angled triangle
<u>Therefore, we can apply special trigonometric functions</u>
<u>These functions are as follows:</u>
<u>Now, taking a look at our diagram, we can note the following:</u>
α = 25°
The opposite side is the required height (x)
The adjacent side is the distance between the cat and the tree = 20 ft
Therefore, we can use the <u>tan function</u>
<u>This is done as follows:</u>
which is 9 ft approximated to the nearest ft
Hope this helps :)
Answer:
The amount of steel used = 94.38
Step-by-step explanation:
Height of the tank = 4.5 m.
Diameter of the tank = 4.2 m.
But,
radius =
=
radius = 2.1 m
Total surface area of a cylinder = 2rh + 2
= 2r(r + h)
= 2 x x 2.1 (2.1 + 4.5)
= 44 x 0.3 (6.6)
= 87.12
Total surface area of a cylinder = 87.12
Since of the steel was wasted, then;
x 87.12 = 7.26
Actual area of steel sheet used = 87.12 + 7.26
= 94.38
Thus, 94.38 of steel was used in making the tank.