Answer: I looked it up and it says something about the waves traveling in a solid but I don’t know if that’s correct.
Answer:
we go up the ramp there is a point where the beam is reflected inside the block, we carefully step back to the point where the beam is horizontal, we measure this angle which is our critical angle.
Explanation:
To design the experiment of measuring the critical angle, we describe the phenomenon, when the light passes from a medium with a higher refractive index to one with a lower index, it separates from the normal one and the Critical Angle is defined as the Angle for which the refraction occurs at 90º
n₂ sin θ₂ = n₁ sin 90
n₁ / n₂ = sin θ₂
As we can see, we have to measure the angle with which the laser touches the exit surface of the glass block.
Design of the experiment:
We place the glass block on the ramp and at the top we hit the conveyor for half the angle, we climb the block on the ramp and see that the angle of incidence of lightning on the exit face changes, part of the beam comes out of the glass , we see it by dispersion in the particles of dirty in the air; Maybe the conveyor or the laser should be moved slightly so that the beam touches the point of origin on the conveyor.
When we go up the ramp there is a point where the beam is reflected inside the block, we carefully step back to the point where the beam is horizontal, we measure this angle which is our critical angle.
Answer:
Explained
Explanation:
Resistance R in a current flow through an object is given by
ρ = resistivity of the material
L= length of the object
A= area of cross section
clearly resistance is directly dependent on length of the object.This means greater the length larger will be resistance to current.
thermal resistance R_th is given by
L= length of the object
A= area of cross section
K = Conductivity of the material
thermal resistance is also is directly dependent on length of the object.This means greater the length larger will be resistance to current.
Resistance = (voltage) / (current)
Resistance = (6.0 v) / (2.0 A)
Resistance = 3.0 ohms
Because they behave just like all the electromagnetic waves of the spectrum. Same equations, just shorter wavelengths and more energy.
Hope you get it :)