Answer: I = 111.69 pA
Explanation: The hall effect is all about the fact that when a semiconductor is placed perpendicularly to a magnetic field, a voltage is generated which could be measured at right angle to the current path. This voltage is known as the hall voltage.
The hall voltage of a semiconductor sensor is given below as
V = I×B/qnd
Where V = hall voltage = 1.5mV =1.5/1000=0.0015V
I = current =?,
n= concentration of charge (electron density) = 5.8×10^20cm^-3 = 5.8×10^20/(100)³ = 5.8×10^14 m^-3
q = magnitude of an electronic charge=1.609×10^-19c
B = strength of magnetic field = 5T
d = thickness of sensor = 0.8mm = 0.0008m
By slotting in the parameters, we have that
0.0015 = I × 5/5.8×10^14 × 1.609×10^-19×0.0008
0.0015 = I×5/7.446×10^-8
I = (0.0015 × 7.446×10^-8)/5
I = 111.69*10^(-12)
I = 111.69 pA
Answer:
Diameter will be 351.42 mm
Explanation:
We have given current flowing in the copper wire i = 310 A
Voltage drop across the wire V = 0.55 volt
We know that resistance is given by
Length of the copper wire l = 1 m
Resisitivity of the copper wire
We know that resistance
As area
So diameter = 351.42 mm
Answer: Technician B
Explanation: In manual cars,the clutch safety is designed to stop the vehicle from moving when you start the gnition. It prevents power from flowing into the circuit . This is found in the pedal mechanism of cars so depressing the clutch pedal will likely cause a defective in the clutch safety. You will begin to perceive the clutch burning and white fumes coming out from the pedal.
The tiny ripples on the soup are not only similar to wind-generated
waves ... they ARE wind-generated waves. This is a big part of the
reason why they bear such an uncanny resemblance.
Answer:
130 km at 35.38 degrees north of east
Explanation:
Suppose the HQ is at the origin (x = 0, y = 0)
So the coordinates of the helicopter after the 1st flight is
After the 2nd flight its coordinate would be:
So in order to fly back to its HQ it must fly a distance and direction of
north of east