All categories

2 years ago

Two ways that radio waves are used for transmitting information. Help me please.

Physics

1 answer:

Travka [436]2 years ago

3 0

1. Stop transmitting start and stop sending photons. This is typical morse code like transmissions of information. By varying the pattern of starts stops you vary the information sent. Also used in digital communications over radios, modems, and pulse dialing over radio/phones.

<span>2. Change the frequency. You use a pattern of shorter and longer wavelengths of radio waves higher and lower energies of individual photons to transmit information. This is frequency modulation </span>

You might be interested in

HELP!!!!!! Need Help !!!

denis23 [38]

Answer:

its y

Explanation:

3 0

2 years ago

a sphere of diameter 6•0cm is moulded into a thin uniform wire of diameter 0•2mm.calculate the length of the wire in metres

Scilla [17]

The length of the wire is 36 m.

<u>Explanation:</u>

Given, Diameter of sphere = 6 cm

We know that, radius can be found by taking the half in the diameter value. So,

$\text { sphere radius, } R=\frac{D}{2}=\frac{6}{2}=3 \mathrm{cm}=3 \times 10^{-2} \mathrm{m}$

Similarly,

$\text { wire radius, } r=\frac{0.2}{2}=0.1 \mathrm{mm}=1 \times 10^{-3} \mathrm{m}$

We know the below formulas,

$\text {volume of sphere}=\frac{4}{3} \times \pi \times R^{3}$

$\text {volume of wire}=\pi \times r^{2} \times l$

When equating both the equations, we can find length of wire as below, where $\pi=\frac{22}{7}$

$\frac{4}{3} \times \pi \times R^{3}=\pi \times r^{2} \times l$

$\frac{4}{3} \times \frac{22}{7} \times\left(3 \times 10^{-2}\right)^{3}=\frac{22}{7} \times\left(1 \times 10^{-3}\right)^{2} \times l$

The $\pi$ value gets cancelled as common on both sides, we get

$\frac{4}{3} \times 27 \times 10^{-6}=10^{-6} \times l$

The $10^{-6}$ value gets cancelled as common on both sides, we get

$l=4 \times 9=36 m$

7 0

2 years ago

A cube has a drag coefficient of 0.8. What would be the terminal velocity of a sugar cube 1 cm on a side in air ( = 1.2 kg/mº)?

anzhelika [568]

0.495 m/s

Explanation

the formula for the terminal velocity is given by:

$\begin{gathered} v=\sqrt[]{\frac{2mg}{\sigma AC}} \\ \text{where} \\ \end{gathered}$

m is the mass

g is 9.81 m/s²

ρ is density

A is area

C is the drag coefficient

then

Step 1

Let's find the mass

$\begin{gathered} \sigma=\frac{m}{v} \\ m=\sigma\cdot v \\ \text{mass}=(2\cdot10^3\frac{\operatorname{kg}}{m^3})\cdot(0.01m)^3 \\ \text{mass}=(2\cdot10^3\frac{\operatorname{kg}}{m^3})\cdot(1\cdot10^{-6}) \\ \text{mass}=2\cdot10^{-3}\operatorname{kg} \\ \text{mass}=0.002\text{ kg } \\ \text{Area}=(0.01\text{ m}\cdot0.01m)=0.0001m^2 \end{gathered}$

now, replace

$\begin{gathered} v=\sqrt[]{\frac{2mg}{\sigma AC}} \\ v=\sqrt[]{\frac{2(0.002kg)(9.81\text{ }\frac{m}{s^2})}{(2\cdot10^3\frac{\operatorname{kg}}{m^3})(0.0001m^2)0.8}} \\ v=\sqrt[]{\frac{0.03924\frac{\operatorname{kg}m}{s^2}}{0.16\frac{\operatorname{kg}}{m^{}}}} \\ v=\sqrt[]{0.2452\frac{m^2}{s^2}} \\ v=0.495\text{ m/s} \end{gathered}$

hence, the answer is 0.495 m/s