Answer:
α = - 1.883 rev/min²
Explanation:
Given
ωin = 113 rev/min
ωfin = 0 rev/min
t = 1.0 h = 60 min
α = ?
we can use the following equation
ωfin = ωin + α*t ⇒ α = (ωfin - ωin) / t
⇒ α = (0 rev/min - 113 rev/min) / (60 min)
⇒ α = - 1.883 rev/min²
Inertia is the resistance of an object to a change in its B. Motion
Answer:
W = F * s
Work done equals applied force * distance traveled
Apparent weight = M g (1 - sin θ) since some of applied force will lighten sled
μ = coefficient of kinetic friction
F cos θ = force applied to motion of sled
s = distance traveled
[μ M g (1 - sin θ)] cos θ * s = work done in moving sled
Note that F = μ M g if applied force is in the horizontal direction
Answer:
because blades of helicopter create a high pressure difference between lower and higher portion of blade so due to this pressure difference helicopter became able to fly.
Explanation:
for instant answer
join wats up group
just scan it
post question
get answer from trusted experts for free
Answer:
The material with higher modulus will stretch less than
The material with lower modulus
Explanation:
A material with a higher modulus is stiffer and has better resistance to deformation. The modulus is defined as the force per unit area required to produce a deformation or in other words the ratio of stress to strain.
E= stress/stain
Hooks law states that provided the elastic limit is not exceeded the extension e of a spring is directly proportional to the load or force attached
F=ke
Where k is the constant which gives the measure of the spring under tension