Answer: <u>Trough </u> can lift the 403,342 ton pioneering spirit crane vessel 10 meters in 30 seconds as if it was a cork. This about 36 GJ if work and 1 GW of power.
Explanation:
Trough is the correct answer because<u> pioneering scale usually abide only on trough not on the other given options</u>. A long , narrow depression between the waves or ridges is known as a trough. The lower point in the period is the trough.
- <u>Speed -:</u> Speed is the distance per unit of time that a body moves. It's a quantity scaler that has just magnitude.
- <u>Wave energy -: </u>The transmission and capture of energy by ocean surface waves is wave energy (or wave power). The energy collected is then used for all sorts of useful work, including the generation of electricity, water desalination, and water pumping.
- <u>Crest -</u>: A crest point within a cycle on a wave with the highest value of upward displacement. A crest is a point on a surface wave where the medium's displacement is at its height.
- <u>Amplitude -:</u> The maximum displacement or distance measured from its equilibrium position, moved by a point on a vibrating body or wave, is called amplitude. It is equal to half of the vibration path's length.
- <u>Period-</u>: The duration T is the time needed to pass a given point for one complete cycle of vibration. The wave length decreases as the frequency of a wave increases.
- <u>Wavelength-:</u> The distance between two successive crests or troughs of a wave can be described as the wavelength. The frequency is inversely proportional to the wavelength. This implies that the longer the wavelength, the smaller the frequency. Similarly, the shorter the wavelength, the higher the frequency would be.
- <u>Frequency</u> -: Frequency defines the number of waves in a given amount of time that travel through a fixed location. In the Hertz unit, frequency is normally measured.
- <u>Information</u> -: A piece of data is a basic fact about the identity or properties of an object, i.e. a portion of its example.
- <u>Milli -</u>: Milli is known as a merged form meaning 'thousand' (millipede) used in the metric system for unit names equal to one thousandth of the base unit (millimeter) given.
Hence , the answer is <u>TROUGH.</u>
Answer:
The acceleration of the object is
Explanation:
Given:
Initial velocity of object = 200 feet/second
Final velocity of object = 50 feet/second
Time of travel = 5 seconds
To calculate acceleration of the object we will find the rate of change of velocity with respect to time.
So, acceleration is given by:
where represents final velocity, represents initial velocity and is time of travel.
Plugging in values to evaluate acceleration.
The acceleration of the object is (Answer). The negative sign shows the object is slowing down.
Answer:
<em>1,378.9ms²</em>
Explanation:
Given the following
Distance S = 70.6m
Time t = 0.32secs
Initial velocity = 0m/s
Required
Acceleration
Using the equation of motion
S = ut+1/2at²
Substitute
70.6 = 0+1/2a(0.32)²
70.6 = 0.0512a
a = 70.6/0.0512
a = 1,378.9
<em>Hence the acceleration is 1,378.9ms²</em>
Yes that is a balaned equation
Answer:
451.13 J/kg.°C
Explanation:
Applying,
Q = cm(t₂-t₁)............... Equation 1
Where Q = Heat, c = specific heat capacity of iron, m = mass of iron, t₂= Final temperature, t₁ = initial temperature.
Make c the subject of the equation
c = Q/m(t₂-t₁).............. Equation 2
From the question,
Given: Q = 1500 J, m = 133 g = 0.113 kg, t₁ = 20 °C, t₂ = 45 °C
Substitute these values into equation 2
c = 1500/[0.133(45-20)]
c = 1500/(0.133×25)
c = 1500/3.325
c = 451.13 J/kg.°C