Answer:
b. slow-moving streams.
Explanation:
In Fluid Mechanics, the Reynolds numbers indicates the existence of turbulence in fluid streams. Low Reynolds numbers are related with laminar flow. The Reynolds formula is:
The Reynolds number is directly proportional to fluid speed. Hence, slow-moving streams are a sound example of laminar flow. The correct answer is B.
Answer:
(E)56.0 m/s
Explanation:
Height =h=-160 m
Because the wallet moving in downward direction
Time=t=7 s
Final speed of wallet=v=0
We have to find the speed of helicopter ascending at the moment when the passenger let go of the wallet.
Where
Substitute the values
Option (E) is true
We shall convert all of the densities to lbs/gal, so the product of
BTU/lbs and lbs/gal gives us the basis of comparison, which was "ratio of energy to volume".
grams / ml x 1 lbs/454 grams → 1 lbs/ 454 ml
1 lbs/454 ml x 3785.41 ml/gal → 3785.41 lbs/454gal
Conversion of g/ml = 8.34 lbs/gal
Looking at each fuel:
Kerosene:
18,500 x (8.34 x 0.82) = 126,517 BTU/gal
Gasoline:
20,900 x (8.34 x 0.737) = 128,463 BTU/gal
Ethanol:
11,500 x (8.34 x 0.789) = 75,673 BTU/gal
Hydrogen:
61,000 x (8.34 x 0.071) = 36,120 BTU/gal
The best fuel in terms of energy to volume ratio is Gasoline.
Gallons required:
BTU needed / BTU per gallon
= 85.2 x 10⁹ / 128,463
= 6.6 x 10⁵ gallons
Answer:
Here Strain due to testing is greater than the strain due to yielding that is why computation of load is not possible.
Explanation:
Given that
Yield strength ,Sy= 240 MPa
Tensile strength = 310 MPa
Elastic modulus ,E= 110 GPa
L=380 mm
ΔL = 1.9 mm
Lets find strain:
Case 1 :
Strain due to elongation (testing)
ε = ΔL/L
ε = 1.9/380
ε = 0.005
Case 2 :
Strain due to yielding
ε '=0.0021
Here Strain due to testing is greater than the strain due to yielding that is why computation of load is not possible.
For computation of load strain due to testing should be less than the strain due to yielding.
Answer:
Thank you so much!!!!
Explanation:
I really need this points