Part of the cell that stores food is called vacuole
Answer:
The leverage or mechanical advantage of pulleys is less obvious, but you can "gang" multiple pulleys together into two sets (blocks) and run the ropes back and forth between the two sets to increase the number of lengths of rope running between them. One end of the rope is connected (fixed) to one of the blocks, and you get to pull on the other end after it is passed back and forth between the blocks of pulleys. This is sometimes called a block and tackle arrangement. With a hook on each side of the block set, you can move a heavy load much like levers do, by multiplying the force. You have to pull more rope just like you have to move a lever more on one side of the fulcrum as compared to the other. When you get all the rope pulled out that you can, you can not move the load anymore because you have become "two-blocked" which means the two blocks are together. Credits to: Moin Khan
Explanation:
The position vector r:
The velocity vector v:
The acceleration vector a:
Extinction of a species is most likely to occur as a result of "<span>environmental changes"
In short, Your Answer would be Option D
Hope this helps!</span>
<h2>Question</h2>
why freezer is made in the upper part of refrigrator
<h2>✒ Answer</h2>
the cold air produced from it is denser than the warmer air in the bottom
<h3>Explaination</h3>
Freezer is normally provided at the top of the refrigerator, because density of the cold air is high compared to the hot air. In a refrigerator the air contacts with the cooling coil and gets cooling.Because of the high density the cold air gets down and the warm air/hot air moves upward and gets cooling from the cooling coil/evaporator coil. This process is repeated. If the Freezer is provided at the bottom place of the refrigerator, the cold air can't to move full area of the refrigerator. So the freezer is normally provided at the top at the refrigerator
