All categories

2 years ago

Work is a transfer of (1 point) energy. force. mass. motion.

Physics

2 answers:

olya-2409 [2.1K]2 years ago

8 0

Answer: Work is a transfer of energy.

Explanation:

Energy is the ability to do work. The energy can be transferred to do work.

Work is done whenever the energy is transferred from one form to another.

To do work, the force is applied through distance.

The force is applied to an object to bring in motion.

Therefore, work is a transfer of energy.

jok3333 [9.3K]2 years ago

6 0

Energy is the ability to do work.

So work can not be done without the transfer of energy from one body to another.

Work is the transfer of energy.

You might be interested in

Calculate the mass of 1.35 moles of sodium chloride (NaCl).

Harlamova29_29 [7]

Answer:d

Explanation:

4 0

2 years ago

The pilot of an aircraft wishes to fly due west in a 33.9 km/h wind blowing toward the south. The speed of the aircraft in the a

diamong [38]

Answer: $\theta =9.96^{\circ}$ North of west

Explanation:

Given

Plane wishes to fly in west

but wind with speed 33.9 km/h towards south obstructing its path

so plane must fly at an angle of \theta w.r.t west such that it final velocity is towards west

Plane absolute speed=195 km/h

To fly towards west velocity in Y direction should be zero

thus $195sin\theta =33.9$

$\theta =9.96^{\circ}$

so Plane should head towards $9.96^{\circ}$ North of west in order to fly in west.

So plane

actual velocity is

$v=-195cos9.96\hat{i}+195sin9.96\hat{j}$

5 0

2 years ago

A long, hollow, cylindrical conductor (inner radius 3.4 mm, outer radius 7.3 mm) carries a current of 36 A distributed uniformly

Elden [556K]

Answer:

a. $B= 9.45 \times10^{-3} T$

b. $B= 0.820 T$

c. $B= 0.0584 T$

Explanation:

First, look at the picture to understand the problem before to solve it.

a. d1 = 1.1 mm

Here, the point is located inside the cilinder, just between the wire and the inner layer of the conductor. Therefore, we only consider the wire's current to calculate the magnetic field as follows:

To solve the equations we have to convert all units to those of the international system. (mm→m)

$B=\frac{u_{0}I_{w}}{2\pi d_{1}} =\frac{52 \times4\pi \times10^{-7} }{2\pi 1.1 \times 10^{-3}} =9.45 \times10^{-3} T\\$

μ0 is the constant of proportionality

μ0=4πX10^-7 N*s2/c^2

b. d2=3.6 mm

Here, the point is located in the surface of the cilinder. Therefore, we have to consider the current density of the conductor to calculate the magnetic field as follows:

J: current density

c: outer radius

b: inner radius

The cilinder's current is negative, as it goes on opposite direction than the wire's current.

$J= \frac {-I_{c}}{\pi(c^{2}-b^{2} ) }}$

$J=\frac{-36}{\pi(5.33\times10^{-5}-1.16\times10^{-5}) } =-274.80\times10^{3} A/m^{2}$

$B=\frac{u_{0}(I_{w}-JA_{s})}{2\pi d_{2} } \\A_{s}=\pi (d_{2}^{2}-b^2)=4.40\times10^{-6} m^2\\$

$B=\frac{6.68\times10^{-5}}{8.14\times10^{-5}} =0.820 T$

c. d3=7.4 mm

Here, the point is located out of the cilinder. Therefore, we have to consider both, the conductor's current and the wire's current as follows:

$B=\frac{u_{0}(I_w-I_c)}{2\pi d_3 } =\frac{2.011\times10^-5}{3.441\times10^{-4}} =0.0584 T$

As we see, the magnitud of the magnetic field is greater inside the conductor, because of the density of current and the material's nature.

3 0

2 years ago

How many moles of nitrogen are needed to completely convert 6.34 mol of hydrogen?

____ [38]

If we use the equation:
N2 + 3H2 --> 2NH3
Then
1 mol of Nitrogen required 3 moles of Hydrogen
x mols : 6.34mols
X = 6.34/3
X = 2.11 moles of Nitrogen are required.

4 0

2 years ago

Read 2 more answers

Why is a minimum of three seismic stations needed to find the epicenter of an earthquake?

vazorg [7]

Each station can detect how far away the epicenter was. So each station basically has a circle made of possible epicenters. When you have three, you narrow it down to one, final point.

5 0

2 years ago