Answer:
A
Step-by-step explanation:
Answer:
5.0 ft - 5.6 ft
Step-by-step explanation:
Given that the structure is to be made using two 12 foot boards, then we expect the total perimeter to be equal to (2*12)= 24 ft.
Using the angle of elevation, 40° and the width of 8 ft then you can apply the formula for tangent of a triangle where ;
Tan α = opposite side length/adjacent length
Tan 40°= h/8
h= 8 tan 40° = 6.71 ft
Applying the cosine of an angle formula to find the length of the sliding side
Cosine β = adjacent length /hypotenuse
Cosine 40°= 8/ sliding side length
sliding side length = 8/cosine 40° =10.44 ft
Checking the perimeter = 10.44 +8+6.71= 25.15 ft
This is more than the total lengths of the boards, so you need to adjust the height as;
24 - 18.44 = 5.56 ft ,thus the height should be less or equal to 5.56 ft
h≤ 5.6 ft
25t means "25 times t" where t is some unknown number. It is a placeholder for a number.
To find what the number is, we undo what is happening to t. So we divide both sides by 25 to undo the operation "multiply by 25"
----------
25*t = 1125
25*t/25 = 1125/25 divide both sides by 25
t = 45
---------
<h3>Answer: 45</h3>
As a check, we can plug t = 45 into the equation and we should get the same value on both sides
25*t = 1125
25*45 = 1125 replace every t with 45
1125 = 1125 the answer is confirmed
perimeter = turn of the figure
P = 6 + 3 + 4 + 4 + 3 + 6 + 3 + 4 + 3 = 36
the triangle has 2 équal sides => isosceles
and 1 angle is 60° so the triangle is equilateral
Volume of the cone = 1/3 pi r^2 h = 1005.31 cm^3
Volume of the sphere = 4/3 pi r^3 = 463.25 cm^3
Volume of remaining portion of the cone = 1005.31 - 463.25
= 542.1 cm^3 to nearest tenth